KHoff7

iTrader: (5)

Matt Ward had this thing going around pretty good today.

CristianTabush

iTrader: (13)

Karl, that's great to hear. I know we have been talking set-up for the past 2 days, so that's awesome that it's starting to materialize.

wtcc

iTrader: (2)

Just an information for everyone who runs the Spec R 64T Rear Belt for AE TC6. Mine lost all his theeth during a race and cost me the win. So having a look between the runs can't be wrong.
I never ever had problems with my rear belts before so I forgot to pay attention.

geeunit1014

iTrader: (14)

Matt let me drive his car yesterday, it was super smooth. Im a little jelly

WD40

iTrader: (8)

Where do I find these set-ups that you are adding?

WD40

iTrader: (8)

Also, I just got a motor fan bracket and have a small problem. The fan included with the LRP SXX TC esc I have has a very very short wire with it. It won't reach all the way to the motor bracket. Any suggestions?

CristianTabush

iTrader: (13)

WD40, the set-ups are on our website, under RSD6 Information page link on the top menu bar. However, these are RSD6 set-ups, not TC6. They are far more aggressive than TC6 set-ups. I would not recommend them.

Fort the fan wire, I would buy a longer servo plug with wire and re solder it from the fan itself. If you have a fine tip soldering iron, it is not that hard to get it done.

Gee, I am glad you think the car is doing well.

WD40

iTrader: (8)

But the fan doesn't plug into the receiver, it plugs into the esc....so it wouldn't be a servo plug with wire would it?

CristianTabush

iTrader: (13)

plug it into your receiver, it should be fine.

WD40

iTrader: (8)

Where? I already have my transponder plugged into my receiver so the only slot available is the 3rd channel. Are you saying plug it into that?

CristianTabush

iTrader: (13)

Yes

WD40

iTrader: (8)

OK thanks for the help!

hobbs

iTrader: (32)

...

slowbunnyrc

hi,

No bad.

A fren started at B9 with RSD6 conversion kit & he ended winning all his finals.
Another started at A4 with RSD6 conversion kit & he eneded winning all his finals.

Their comments about RSD6 compared to original chasis was RSD6 allowed them to push their cars harder than before.

see photos at slowbunnyrc.blogspot.com

dennisV

Yeah, stuff came in today!
Going to build it asap. Thanks CT!