Team Associated RC10 B5m Mid-Motor & Rear Motor Thread
|
|||
Tech Prophet
iTrader: (84)
I ordered the low-rider wing mounts from shapeways on October 8th. They still haven't shipped. I understand they need to be printed but does it normally take this long?
Tech Prophet
iTrader: (84)
Tech Elite
iTrader: (36)
http://www.amainhobbies.com/rc-cars-...sc1733/p437554
Tech Champion
iTrader: (14)
Im going to bet they are pretty small. Prob .010. Same ones used on the 44.
http://www.amainhobbies.com/rc-cars-...sc1733/p437554
http://www.amainhobbies.com/rc-cars-...sc1733/p437554
Tech Elite
iTrader: (36)
Tech Initiate
Reedy Sonic 540 question.
Hi
I just got a slightly used B5m and with it came a Reedy Sonic motor. The seller told me that it had a different rotor in it that was for 1s batteries. In a container he had the one for 2s.
I began to change them and found that the supposed 2s rotor does not fit either the bearings at each end of the motor.
I went on to Associated's site and there are many different rotors but no information on them.
The rotor that fits has written on it: Reedy Sonic s12.3 x 25.0. On the flat part of the shaft is the Associated id number for the rotor on the site which is 955.
Can anyone explain what is going on here?
Thanks, in advance.
John
I just got a slightly used B5m and with it came a Reedy Sonic motor. The seller told me that it had a different rotor in it that was for 1s batteries. In a container he had the one for 2s.
I began to change them and found that the supposed 2s rotor does not fit either the bearings at each end of the motor.
I went on to Associated's site and there are many different rotors but no information on them.
The rotor that fits has written on it: Reedy Sonic s12.3 x 25.0. On the flat part of the shaft is the Associated id number for the rotor on the site which is 955.
Can anyone explain what is going on here?
Thanks, in advance.
John
Tech Champion
iTrader: (170)
Hi
I just got a slightly used B5m and with it came a Reedy Sonic motor. The seller told me that it had a different rotor in it that was for 1s batteries. In a container he had the one for 2s.
I began to change them and found that the supposed 2s rotor does not fit either the bearings at each end of the motor.
I went on to Associated's site and there are many different rotors but no information on them.
The rotor that fits has written on it: Reedy Sonic s12.3 x 25.0. On the flat part of the shaft is the Associated id number for the rotor on the site which is 955.
Can anyone explain what is going on here?
Thanks, in advance.
John
I just got a slightly used B5m and with it came a Reedy Sonic motor. The seller told me that it had a different rotor in it that was for 1s batteries. In a container he had the one for 2s.
I began to change them and found that the supposed 2s rotor does not fit either the bearings at each end of the motor.
I went on to Associated's site and there are many different rotors but no information on them.
The rotor that fits has written on it: Reedy Sonic s12.3 x 25.0. On the flat part of the shaft is the Associated id number for the rotor on the site which is 955.
Can anyone explain what is going on here?
Thanks, in advance.
John
Try asking here: http://www.rctech.net/forum/team-com...943-reedy.html
Tech Rookie
Weight of a Stock Factory Lite Chassis pan
Does anyone know the weight of the chassis pan in the new Factory Lite Rc10B5M ?
Tech Initiate
Thanks for your suggestion Matt.
I took a look at the Reedy thread and it has only recently become active again. I will try calling Associated in the morning and report back here in case this is important for anyone else.
There are no marks at all on the supposed 2s rotor. It is all black.
I took a look at the Reedy thread and it has only recently become active again. I will try calling Associated in the morning and report back here in case this is important for anyone else.
There are no marks at all on the supposed 2s rotor. It is all black.
All black rotor is commonly the X12 old rotors they ran in the X12 motors. Egh rotors, I wouldn't run them.