Cody227

I just blew my motor and the only other motors I have are a 13.5T and a 3.5T. Even with turbo boost to the max the 13.5T is just too slow... would it be insane to try the 3.5T? I plan on limiting throttle to 80% on the radio but I don't want to damage anything :/

fliedlice

iTrader: (2)

just wondering if people are converting there b5m to b6m and what success they have ????

boucher

Everything you need for the conversion is in the B6/B6d kit

fliedlice

iTrader: (2)

.

boucher

There are a few options for b5m laydown gearboxes. I'd recommend searching a little.

Eddie_E

Has anybody used the front end parts off the B6 in the B5M? I'd like to replace the front hubs and steering blocks, so I don't have to glue the bearing inserts next time.

thecman26

iTrader: (112)

Epic!

CCristo

iTrader: (56)

Yes, they bolt right on

Krio

iTrader: (159)

However, the geometry is different and you will mess up your bump steering and ackerman angles. It isn't a suggested modification.

Someone could make different bolt on steering posts for the b6 hubs to mimic the ball stud location of a b5. There's a free aftermarket parts idea for anyone with a cnc mill.

fliedlice

iTrader: (2)

hey just wondering if anyone has tried using any of the old b4.x parts for b5m ??? like front/rear hubs, knuckles, front/rear arms, diffs ?? im not to keen on using the old shocks as i like the big boar with alm caps with bleed screw....

thanks.

jl34

does anyone know if the b6 wing mounts fit the b5m?

team green

iTrader: (14)

No they do not.

tylem28

iTrader: (17)

Does anyone know if the RPM front wide bumper will fit on a B5M? The 4 hole pattern looks the same. If not do they make a front wide bumper for the B5M?

http://www3.towerhobbies.com/cgi-bin...FZKMaQodIFcLiQ

jl34

thanks team green!

jl34

not sure on the rpm, this will fit if you are interested:

https://tboneracing.net/11147-tbr-ra...ciated-b5-mid/