AKA compound ID
#5
If you look, they do have model numbers. The model number only designates tread pattern though. They don't have the letter designation to distinguish compound. I didn't realize that there were different color dots indicating compound but I see them now.
Thanks
Thanks
#8
Tech Master
You can also rub your finger across the pattern. I can tell that way at least.
#11
Tech Elite
iTrader: (58)
It's fairly easy to tell the difference between med and soft by rubbing the tread. The pins / knobs will fold over much easier on the softer tires. I don't run hard or super-soft, so I can't be sure it's as easy to tell the difference with those.
I agree though, I always mark the inside of the wheel with the compound....
#12
Tech Elite
iTrader: (25)
Thats why the bag was made the way it was. So you can store your tires, keep the rubber fresh and the label on the bag will tell you what compound or if the label is gone you can Sharpie the info on the back.
However, you can "feel" the difference.
OR
Use a tire durometer
However, you can "feel" the difference.
OR
Use a tire durometer
#14
Thats why the bag was made the way it was. So you can store your tires, keep the rubber fresh and the label on the bag will tell you what compound or if the label is gone you can Sharpie the info on the back.
However, you can "feel" the difference.
OR
Use a tire durometer
However, you can "feel" the difference.
OR
Use a tire durometer