eXpress Motorsports
Tech Champion
iTrader: (42)
Congrats Michael Herald Jr. on his first round TQ in Vegas 1/12 17.5 running a Express RPM Kill Shot based Motor.
R/C Tech Elite Member
iTrader: (66)
Do the Killshot motors fit the Xray T4? I know thre was a problem when they first came out. Wondering has that been fixed or not?
Tech Champion
iTrader: (42)
Yes, all the later batches have revised back plates.
Tech Champion
iTrader: (42)
Congrats to Michael Herald Jr. on setting the official TQ in 1/12 17.5 at The IIC in Vegas running Express Kill Shot RPM Motor and Formula X Batteries from ReVtech.
Tech Champion
iTrader: (42)
2013 Vegas IIC with a small team delivered a great punch and was known to be in the house!!
Congrats to Mike Herald Jr. on placing 2nd , and TQ in 17.5 1/12 A Main !
Congrats to Devin Patterson for placing 3rd in Spec GT A Main and 13.5 TC!
Congrats to Mike Herald Jr. for placing 3rd (from 9th!!!) in 17.5 Touring A Main!
Congrats to Leighton Lederer for placing 9th in Amateur 17.5 TC after some issues.
Matt Ward for doing well and placing in the 17.5 TC C-Main, and Ward placing 2nd in the 13.5 TC C-Main. The field was stacked in both touring classes this year .
Paul Olson , Kevin Creasar and others also on a great well done effort at IIC in Vegas.
Thanks also to all those who chose Express Products for your power.
Congrats to Mike Herald Jr. on placing 2nd , and TQ in 17.5 1/12 A Main !
Congrats to Devin Patterson for placing 3rd in Spec GT A Main and 13.5 TC!
Congrats to Mike Herald Jr. for placing 3rd (from 9th!!!) in 17.5 Touring A Main!
Congrats to Leighton Lederer for placing 9th in Amateur 17.5 TC after some issues.
Matt Ward for doing well and placing in the 17.5 TC C-Main, and Ward placing 2nd in the 13.5 TC C-Main. The field was stacked in both touring classes this year .
Paul Olson , Kevin Creasar and others also on a great well done effort at IIC in Vegas.
Thanks also to all those who chose Express Products for your power.
Tech Champion
iTrader: (42)
For those who been asking, We just got another batch of D3.5 Ripper 17.5 motors in.. These are LEGAL for next weekends Halloween Classic, Cleveland Indoor Champs in November, January Snowbirds ect....
Tech Fanatic
iTrader: (10)
Hey buddy its time for me to place an order for some express power....sending you a PM.
Thanks
Thanks
Tech Elite
iTrader: (95)
haven't been racing for a few weeks until this weekend. Day one of qualifying is over but we have one more heat and then mains start tomorrow at our Top Gun race. I am qualified 4th out of 14 right now. Very pleased with my rpm killshot still. There are a few elite Team Powers guys at my track that I can no way catch up to. Its pretty depressing at times. So after todays race I said to myself I have to get more out of this motor. I have been geared down to 3.4 and motor timing set to 60*. I had a feeling this motor was capable of doing more and finally decided what the hell I will try it. I turned timing up to 70* and to offset the temps that could of happened at gearing at 3.4fdr. I geared mine at 4.1 to see what would happen. I thought for fun it was going to go fast then poof in a lap or two. My gut feeling was right. This motor loved it. By far the fastest thing yet. Still pulling at the end of the straight. I had a friend temp it after a couple of minutes and it was at 108*. I stayed out for about 5minutes more then he temped again and it was at 120*. I cant wait for tomorrow. I wont say not to try it for yourselves but then again you never know till you try.
Tech Master
iTrader: (19)
haven't been racing for a few weeks until this weekend. Day one of qualifying is over but we have one more heat and then mains start tomorrow at our Top Gun race. I am qualified 4th out of 14 right now. Very pleased with my rpm killshot still. There are a few elite Team Powers guys at my track that I can no way catch up to. Its pretty depressing at times. So after todays race I said to myself I have to get more out of this motor. I have been geared down to 3.4 and motor timing set to 60*. I had a feeling this motor was capable of doing more and finally decided what the hell I will try it. I turned timing up to 70* and to offset the temps that could of happened at gearing at 3.4fdr. I geared mine at 4.1 to see what would happen. I thought for fun it was going to go fast then poof in a lap or two. My gut feeling was right. This motor loved it. By far the fastest thing yet. Still pulling at the end of the straight. I had a friend temp it after a couple of minutes and it was at 108*. I stayed out for about 5minutes more then he temped again and it was at 120*. I cant wait for tomorrow. I wont say not to try it for yourselves but then again you never know till you try.
From:
Elite Team Powers Guy.
Tech Champion
iTrader: (42)
Hey all....
Fresh shipment of D3.5 17.5 motors should be set to ship Thursday. Those looking for great motor so fast they tried to Ban it..Now is your chance to get a great deal..Now thru Oct 31st D3.5 Ripper motors will be on SALE on the website.
Josh..70*..Yikes that asking for trouble..But you have been one on the edge..LOL Just be careful if motor is still pulling at the end of the straight that is a sure sign of over geared. Motor should really just pull 3/4 the longest straight aprox ..any further it will strain on the infield and produce issues that can result in lack of infield power or risk or hurting motor.
Fresh shipment of D3.5 17.5 motors should be set to ship Thursday. Those looking for great motor so fast they tried to Ban it..Now is your chance to get a great deal..Now thru Oct 31st D3.5 Ripper motors will be on SALE on the website.
Josh..70*..Yikes that asking for trouble..But you have been one on the edge..LOL Just be careful if motor is still pulling at the end of the straight that is a sure sign of over geared. Motor should really just pull 3/4 the longest straight aprox ..any further it will strain on the infield and produce issues that can result in lack of infield power or risk or hurting motor.
Tech Elite
iTrader: (95)
Tech Champion
iTrader: (42)
Huge shout out.. Karl Hoffmeister TQ and Win Halloween Classic in 17.5 TC running a Express D3.5 Ripper. Congrats Karl, all those hours wrenching and track time really paid off well. Great to see a new face on top of the box!!!
Tech Champion
iTrader: (42)
Another Huge shout out to Ray Klebanowski.. Ray Won the A Main in USGT at The Halloween Classic in Ohio. Ray was running a Express Kill Shot 21.5 HT motor. Congrats on the big win Ray!!
Congrats to all for the great efforts..Matt Ward on a solid weekend just having small issues just missing the show and Sam Isaacs on a strong P-8 in 17.5 TC A Main.
Congrats to all for the great efforts..Matt Ward on a solid weekend just having small issues just missing the show and Sam Isaacs on a strong P-8 in 17.5 TC A Main.
Tech Regular
iTrader: (1)
Hey john any tips for 1/12 Pan car running express killshot rpm? Right now running stock timing and 80-90 roll out. Sound about right? Or is there a sweet spot for the tip out. Running on med/large track
Tech Champion
iTrader: (42)
Hope this helps...