Bodyshell Handling Characteristics....
#46
Tech Fanatic
One thing that will take some getting used to with the stc6 comparedito the gx is the shape/size difference. The gx was so wide and blocky with long sharp shoulders. They made it easy to see the car. The stc6 looks tiny with the short shoulders and low roof edges.
#48
I would rate the S5 and TSX as "steering" shells but with decent stability still, I liked them both in all conditions and would rank them quite similar to an LTC-R.
The XFR was quite a lot more understeery, I didn't really like it.
The new GSF is supposed to be an all-conditions shell, I believe it has slightly less steering than the TSX. Haven't run it personally.
One thing I have found with the Blitz shells is that the material is less prone to cracking than the Protoform.
The XFR was quite a lot more understeery, I didn't really like it.
The new GSF is supposed to be an all-conditions shell, I believe it has slightly less steering than the TSX. Haven't run it personally.
One thing I have found with the Blitz shells is that the material is less prone to cracking than the Protoform.
#49
Tech Elite
iTrader: (8)
I would rate the S5 and TSX as "steering" shells but with decent stability still, I liked them both in all conditions and would rank them quite similar to an LTC-R.
The XFR was quite a lot more understeery, I didn't really like it.
The new GSF is supposed to be an all-conditions shell, I believe it has slightly less steering than the TSX. Haven't run it personally.
One thing I have found with the Blitz shells is that the material is less prone to cracking than the Protoform.
The XFR was quite a lot more understeery, I didn't really like it.
The new GSF is supposed to be an all-conditions shell, I believe it has slightly less steering than the TSX. Haven't run it personally.
One thing I have found with the Blitz shells is that the material is less prone to cracking than the Protoform.
-Mike
#50
Carpet and Asphalt, but never very high grip.
#51
Tech Elite
iTrader: (95)
You also can check out the Blitz body thread for more info on handling characteristics and charts.
#52
Tech Elite
iTrader: (8)
Thanks. I didn't realize there was a blitz thread.
Found it:
http://www.rctech.net/forum/electric...ighlight=blitz
-Mike
Found it:
http://www.rctech.net/forum/electric...ighlight=blitz
-Mike
#53
Tech Fanatic
Can anyone comment on bittydesign nardo and striker 3.0?
#54
Just ran the Nardo at the ETS in Czech on carpet and liked the extra steering it gave over the PF Speed6, it was a little more lively at the rear but once the grip had come up even more it felt great.
From my post in thsi thread in March, was on asphalt;
Bittydesign Nardo
This body felt very similar to the Nazda 3, perhaps slightly less aggressive than the LTC-R but was certainly quite stable.
Need to try it back to back with the LTC-R for a direct comparison.
From my post in thsi thread in March, was on asphalt;
Bittydesign Nardo
This body felt very similar to the Nazda 3, perhaps slightly less aggressive than the LTC-R but was certainly quite stable.
Need to try it back to back with the LTC-R for a direct comparison.
#56
I have always used the Ride Carbon 'look' wings.
So I'm actually removing the wing as part of the equation, whether or not that's a good I'll leave you all to decide
#58
These are 2 bodies indicated for high or very high surface grip, Narḍ you can use it also on carpet, the Striker-SR 3.0 it is suggested on tarmac.
To help our customers to understand easily how our TC 190mm bodies works we created a very simply image:
as you can see above, the Striker-SR 3.0 model is our most aggressive body of the whole line, he generate the highest downforce respect the other models, when the grip is high on tarmac this is our fastest body, expecially on high speed layout track. As shown in the Track Guide image we suggest to use our "Ultra Charge" hard wing (1mm thick) with this body.
The Narḍ body is very fast body that need high grip because also this model generate an high level of downforce and his use is the fastest way you have to solve understeering issue. In this case we suggest to mount our "Charge" hard wing (1mm thick) to maximize his overall balance. This body has been designed in the tyres area to allow to the driver a very large placement range (forward or backward respect the central line) that change a lot the driving feeling without affecting the appearance of the wheel guards.
All our TC bodies are made with light weight Lexan so the rear wings comes thin. In the Modified class the use of our hard wings is always suggested to improve the rear stability, but in the Stock class this is not obligatory always at 100%, example our recent M15 body if you use it on carpet the light std wing could be the right choice to have better fluency in the turns.
To help our customers to understand easily how our TC 190mm bodies works we created a very simply image:
as you can see above, the Striker-SR 3.0 model is our most aggressive body of the whole line, he generate the highest downforce respect the other models, when the grip is high on tarmac this is our fastest body, expecially on high speed layout track. As shown in the Track Guide image we suggest to use our "Ultra Charge" hard wing (1mm thick) with this body.
The Narḍ body is very fast body that need high grip because also this model generate an high level of downforce and his use is the fastest way you have to solve understeering issue. In this case we suggest to mount our "Charge" hard wing (1mm thick) to maximize his overall balance. This body has been designed in the tyres area to allow to the driver a very large placement range (forward or backward respect the central line) that change a lot the driving feeling without affecting the appearance of the wheel guards.
All our TC bodies are made with light weight Lexan so the rear wings comes thin. In the Modified class the use of our hard wings is always suggested to improve the rear stability, but in the Stock class this is not obligatory always at 100%, example our recent M15 body if you use it on carpet the light std wing could be the right choice to have better fluency in the turns.
#60
Time to add another couple of bodyshells, the Montech Nazda 2 and Protoform Dodge Dart
I first used the Dart at the German round of the ETS on high bite carpet.
It felt nice to drive, although most of us were struggling a little with turn in (open Mod)
At my local carpet track (same carpet as ETS) it felt nice to drive, but laps were slightly down on the PF Speed6
Need to try it back to back with other bodies outdoors.
I finally tried the Montech Nazda 2 recently. Outdoors at my local track it felt similar to the PF Speed6. Although it definitely felt safer than the LTC-R and Nazda3 due to it's less aggressive steering it did allow me to push as hard as I wanted and it allowed me to attack other cars into apex's etc without fear of losing control.
On high bite Carpet it felt a bit more loose than my PF Speed6.
Will try it again tonight against the Speed6 once grip has come up.
I first used the Dart at the German round of the ETS on high bite carpet.
It felt nice to drive, although most of us were struggling a little with turn in (open Mod)
At my local carpet track (same carpet as ETS) it felt nice to drive, but laps were slightly down on the PF Speed6
Need to try it back to back with other bodies outdoors.
I finally tried the Montech Nazda 2 recently. Outdoors at my local track it felt similar to the PF Speed6. Although it definitely felt safer than the LTC-R and Nazda3 due to it's less aggressive steering it did allow me to push as hard as I wanted and it allowed me to attack other cars into apex's etc without fear of losing control.
On high bite Carpet it felt a bit more loose than my PF Speed6.
Will try it again tonight against the Speed6 once grip has come up.