Team Durango DEST210R thread
#1021
Tech Master
iTrader: (1)
There is one thing holding me back from ordering the DEST210R , and trying to jump start that ST class again. I'm tired of searching/reading posts and coming up with nothing on 12mm hex adapters except custom made ones. If there is a site somewhere, please point me the right direction.
#1023
Suspended
iTrader: (115)
There is one thing holding me back from ordering the DEST210R , and trying to jump start that ST class again. I'm tired of searching/reading posts and coming up with nothing on 12mm hex adapters except custom made ones. If there is a site somewhere, please point me the right direction.
Last edited by Jeepy2013; 10-23-2014 at 08:59 AM.
#1024
There is one thing holding me back from ordering the DEST210R , and trying to jump start that ST class again. I'm tired of searching/reading posts and coming up with nothing on 12mm hex adapters except custom made ones. If there is a site somewhere, please point me the right direction.
I did buy a set of tires to mount onto the kit wheels and after trying it out I do like the way they fit. In the end I think I'm going to buy wheels and switch over to the 15mm Durango intended. Its pretty easy to remove tires from my 12mm wheels using acetone fumes.
#1029
Suspended
iTrader: (115)
I'm pretty new to Durango, had a DEX408T last summer for a bit, but now that I moved and race indoors I am back to 1/10th scale. I just picked up the ST maybe 2 months ago, like it so much I bought a DESC210R kit for my wife to run and I ordered a DEX210 V2 yesterday.
My main racer is a B5M in stock buggy, but I want to mess around with the Durango and see how it does.
I've also just started racing the ST in the 2wd mod truck class when there is enough to run.
My main racer is a B5M in stock buggy, but I want to mess around with the Durango and see how it does.
I've also just started racing the ST in the 2wd mod truck class when there is enough to run.
#1030
Anyone use the 81T spur in their ST or SC? I'm used to an 84 in my associated but don't really want to buy a machined one for $15 just to get 84. I ran 20/87 with a 7.5 so I'll probably just try going to a 21 and see if that helps. 19/81 is right in between those two so I thought that might be a good FDR. Dropping all those teeth though I'm wondering if it will change the feel and make it feel harsh? It should however put the motor closer to the rear axles for a little better grip too.
#1031
Tech Master
iTrader: (1)
I'm over the 15mm wheel hex thing. I can live with using the same rims on either front or rear of a vehicle.
New problem keeping me from hitting the "confirm your order" button for the DEST210R is parts. I am waiting for a reply from Hobbico/Team Durango about the discontinuation of the DEST210R on Tower Hobbies.
New problem keeping me from hitting the "confirm your order" button for the DEST210R is parts. I am waiting for a reply from Hobbico/Team Durango about the discontinuation of the DEST210R on Tower Hobbies.
#1032
Suspended
iTrader: (115)
I'm over the 15mm wheel hex thing. I can live with using the same rims on either front or rear of a vehicle.
New problem keeping me from hitting the "confirm your order" button for the DEST210R is parts. I am waiting for a reply from Hobbico/Team Durango about the discontinuation of the DEST210R on Tower Hobbies.
New problem keeping me from hitting the "confirm your order" button for the DEST210R is parts. I am waiting for a reply from Hobbico/Team Durango about the discontinuation of the DEST210R on Tower Hobbies.
#1033
Tech Master
iTrader: (38)
Hi all, long time lurker, first time poster...
So, after 20+ years of bashing RC cars in fields and parking lots, I entered my first race Saturday night. Novice class, 4 SCTs, 1 buggy and me (DEST210). I took qualified 1st in 3 of 4 qualifiers, Took the TQ for the Main and managed a 2nd place finish. SO MUCH FUN! I cant believe I stayed away from racing all these years. Thanks to Jeepy2013, I now know how much fun this is goign to be!
I'll post up my setup this evening when I get home so you guys can critique it. The ST is the RTR version with a Reedy sonic 17.5, Tekin RS (original version) and a slow futaba servo all controlled by a spektrum DX2L.
Tons of understeer when I get on the throttle but TONS of steering when I'm rolling off throttle - I hope its just in the shocks and springs I was running. We'll see this wednesday when I go for round 2!
Thanks for listening - look forward to input from everyone.
So, after 20+ years of bashing RC cars in fields and parking lots, I entered my first race Saturday night. Novice class, 4 SCTs, 1 buggy and me (DEST210). I took qualified 1st in 3 of 4 qualifiers, Took the TQ for the Main and managed a 2nd place finish. SO MUCH FUN! I cant believe I stayed away from racing all these years. Thanks to Jeepy2013, I now know how much fun this is goign to be!
I'll post up my setup this evening when I get home so you guys can critique it. The ST is the RTR version with a Reedy sonic 17.5, Tekin RS (original version) and a slow futaba servo all controlled by a spektrum DX2L.
Tons of understeer when I get on the throttle but TONS of steering when I'm rolling off throttle - I hope its just in the shocks and springs I was running. We'll see this wednesday when I go for round 2!
Thanks for listening - look forward to input from everyone.
#1035
Tech Master
iTrader: (16)
Anybody looking for a DEST210 roller or Bar Code tires on Durango Rims?
http://www.rctech.net/forum/r-c-item...l#post13634867
http://www.rctech.net/forum/r-c-item...-like-new.html
Sorry for the spam but thought some one could use these.
http://www.rctech.net/forum/r-c-item...l#post13634867
http://www.rctech.net/forum/r-c-item...-like-new.html
Sorry for the spam but thought some one could use these.