137LikesTeam Associated RC10 B5m Mid-Motor & Rear Motor Thread
04-22-2024, 12:09 PM - Wikipost
|
|||
|
|||
|
07-23-2014, 09:33 AM
I dont know if that firmware is available for the Stock Spec r10. I dont even for sure know it is cheater firmware. I just feels like it. And then there are the rumors. The black box will be pricey. I just buy lightly used in great condition r10 pro on here for 100-110. I try to save cash where i can
07-23-2014, 09:48 AM
Can someone post a solid setup for a 90x60 indoor, damp, medium bite (black/green JC dirt webs) Tight/technical layout....using a Reedy sonic 8.0 and a Reedy 4100 shorty pack.....thank you
07-23-2014, 10:25 AM
Tech Regular
iTrader: (20)
Which software version are you guys rendering too? I can't tell which is which or which is newer.
07-23-2014, 10:28 AM
I am at work. it has an "11" in it. something like 081112. I am told the firmware versions are actually dates. so that firmware is nov 8 2011. The other one is a smaller number.
07-23-2014, 11:39 AM
Anyone use Castle esc/motors on their B5M?
Curious,
I use a Castle Sidewinder combo in my SC10, I'm wondering if any of you people use a Mamba Max or anything like that in your B5M? Does Castle have a good reputation for power?
I'm a beginner in RC even though I've played around with this stuff for years. This is the first off-road kit that I'm assembling. Only did RTR in the past.
I use a Castle Sidewinder combo in my SC10, I'm wondering if any of you people use a Mamba Max or anything like that in your B5M? Does Castle have a good reputation for power?
I'm a beginner in RC even though I've played around with this stuff for years. This is the first off-road kit that I'm assembling. Only did RTR in the past.
07-23-2014, 11:41 AM
Sorry none of those would work, mini pins don't work, especially if the track get dragged before mains. This is a dirt track, I need something to dig in like a large pin. , bow ties work well if it's wet in the harder packed corners, but if dries out, those hard pack corners can be a pain. I will probably try the calibers.
In September, I will be going to stateline raceway in Fremont, IN, which will be a completely different setup.
In September, I will be going to stateline raceway in Fremont, IN, which will be a completely different setup.
07-23-2014, 11:49 AM
will it "fit". with some modding it might if you use a shorty. Are they good? Nah, not really. If you want to keep the costs down and get a smaller/lighter esc look at the justock esc.
http://www.falconsekido.com/products...c-esc-for-1-10. $50 shipped
http://www.falconsekido.com/products...c-esc-for-1-10. $50 shipped
07-23-2014, 11:51 AM
Most people here dont race on "dirt". My understanding is that the caliber style tires were designed to work in places that the old step pins worked. I ran the outdoors on unswept dry tracks and they were fine. if they work on your truck, they should "work" on your buggy.
07-23-2014, 12:05 PM
Sorry none of those would work, mini pins don't work, especially if the track get dragged before mains. This is a dirt track, I need something to dig in like a large pin. , bow ties work well if it's wet in the harder packed corners, but if dries out, those hard pack corners can be a pain. I will probably try the calibers.
In September, I will be going to stateline raceway in Fremont, IN, which will be a completely different setup.
In September, I will be going to stateline raceway in Fremont, IN, which will be a completely different setup.
07-23-2014, 12:30 PM
07-23-2014, 12:46 PM
Curious,
I use a Castle Sidewinder combo in my SC10, I'm wondering if any of you people use a Mamba Max or anything like that in your B5M? Does Castle have a good reputation for power?
I'm a beginner in RC even though I've played around with this stuff for years. This is the first off-road kit that I'm assembling. Only did RTR in the past.
I use a Castle Sidewinder combo in my SC10, I'm wondering if any of you people use a Mamba Max or anything like that in your B5M? Does Castle have a good reputation for power?
I'm a beginner in RC even though I've played around with this stuff for years. This is the first off-road kit that I'm assembling. Only did RTR in the past.
07-23-2014, 12:47 PM
will it "fit". with some modding it might if you use a shorty. Are they good? Nah, not really. If you want to keep the costs down and get a smaller/lighter esc look at the justock esc.
http://www.falconsekido.com/products...c-esc-for-1-10. $50 shipped
http://www.falconsekido.com/products...c-esc-for-1-10. $50 shipped
07-23-2014, 12:53 PM
Tech Apprentice
my Xtreme stock showed up today. LCD box shows up friday. Kit should be done by monday (RM) - looking forward to it.
Side question per usual. Soldering - is it really that hard? I had my guy at the shop do my MM because i didn't want to screw up $250 of brand new electronics, but I think I need to take the plunge this time.
Side question per usual. Soldering - is it really that hard? I had my guy at the shop do my MM because i didn't want to screw up $250 of brand new electronics, but I think I need to take the plunge this time.
07-23-2014, 12:57 PM
my Xtreme stock showed up today. LCD box shows up friday. Kit should be done by monday (RM) - looking forward to it.
Side question per usual. Soldering - is it really that hard? I had my guy at the shop do my MM because i didn't want to screw up $250 of brand new electronics, but I think I need to take the plunge this time.
Side question per usual. Soldering - is it really that hard? I had my guy at the shop do my MM because i didn't want to screw up $250 of brand new electronics, but I think I need to take the plunge this time.
07-23-2014, 01:10 PM
Just ordered some hop ups for performance....wanted to the get the most for what I spent...doing hexes/axles and arm mounts next, had a b5r at end of last season and loved it, havent had this car on track yet.
ae FT alum rack
ae FT motor plate
ae FT clear x rings
schelle nova slipper
schelle topshaft
ae FT alum rack
ae FT motor plate
ae FT clear x rings
schelle nova slipper
schelle topshaft