ORCA Team - VRITRA VX COMPETITON ESC
#151
Tech Elite
iTrader: (15)
Punch 10
Drive Freq 8K
Brake freq 700
drag brake 3%
Initial brake 3%
This is what I used in my Orca VX at the IIC to qual 2nd and blow out in the main. Mike Haynes TQ'd and won stock with an ORCA VX but unsure of his settings. Blake was also using one in the A main of Stock as well. There were a ton of ORCA's at the event and everyone was happy with their performance and feel.
EA
Drive Freq 8K
Brake freq 700
drag brake 3%
Initial brake 3%
This is what I used in my Orca VX at the IIC to qual 2nd and blow out in the main. Mike Haynes TQ'd and won stock with an ORCA VX but unsure of his settings. Blake was also using one in the A main of Stock as well. There were a ton of ORCA's at the event and everyone was happy with their performance and feel.
EA
#154
Any idea when the new v3.0 firmware will be released?
#156
Punch 10
Drive Freq 8K
Brake freq 700
drag brake 3%
Initial brake 3%
This is what I used in my Orca VX at the IIC to qual 2nd and blow out in the main. Mike Haynes TQ'd and won stock with an ORCA VX but unsure of his settings. Blake was also using one in the A main of Stock as well. There were a ton of ORCA's at the event and everyone was happy with their performance and feel.
EA
Drive Freq 8K
Brake freq 700
drag brake 3%
Initial brake 3%
This is what I used in my Orca VX at the IIC to qual 2nd and blow out in the main. Mike Haynes TQ'd and won stock with an ORCA VX but unsure of his settings. Blake was also using one in the A main of Stock as well. There were a ton of ORCA's at the event and everyone was happy with their performance and feel.
EA
also what FDR and motor can timing were you using for 17.5?
thx,
Chris
#158
#159
Tech Champion
iTrader: (103)
First impressions on this speedo. Construction is very good. Has a very solid feel and seems they've used high quality materials. Very impressive. Installed it in my 2wd buggy for a few laps tonight and the speedo is very smooth. Not sure if my gearing is correct yet and I didn't make too many adjustments. I'm going to spend some more time with it tomorrow and Saturday to work on setup. Program card was easy to use as well. So far, pretty happy with the purchase and can't wait to get one in my TC.
#160
1s version settings?
Anyone gotten a good base yet with the 1s version?
17.5 blinky and or 13.5 blinky--carpet indoors---smaller than vegas track.
I couldn't install mine untill after the series race yesterday.
(ROAR approved only)
So now it is time to see what it will do.
thanks,
Darrald
17.5 blinky and or 13.5 blinky--carpet indoors---smaller than vegas track.
I couldn't install mine untill after the series race yesterday.
(ROAR approved only)
So now it is time to see what it will do.
thanks,
Darrald
#161
Ran the speedo for the 1st time today in 17.5 blinky sedan, and it ran flawlessly. I took Erik's base setup, but changed a couple things to my liking.
Easy to set up/change setings, and is by far the smoothest esc i have driven.
Can't wait to put it to the test at the Classic.
Easy to set up/change setings, and is by far the smoothest esc i have driven.
Can't wait to put it to the test at the Classic.
#162
Anyone have 21.5T boosted baseline settings? Having a rough time getting mine setup...
#164
Craig you absolutely rock mate cheers. Will test at the track tomorrow.