FS: Xray - Crawler - Kyosho - TQ SX10 SC
#1
FS: Xray - Crawler - Kyosho - TQ SX10 SC
I realized I might have a problem since I now have 9 cars. So it is time to sell my least used cars. These cars have all been well maintained and will show normal wear. Prices shown include shipping USPS in the US. I use Paypal so feel free to save yourself 3% if you pay as a 'gift'.
1.) Xray T2 and T2 007 US-Spec. I first bought the 007 used along with all the spare parts. Then I got a chassis off RC Tech and managed to build a second car from the spare parts. I imagine I have close to enough parts to build a third car or to keep these two cars running for several seasons. Easily $350 worth of spare parts. The cars have many upgrades already including aluminum hubs, lipo battery bars, sway bar sets. $350 for everything.
2.) Kyosho TF-5 Stallion - Another car I bought used and raced VTA. I won't be heart broken if it doesn't sell. It is gorgeous just to look. I do have NIB spares but I have never broken a part (plus side to VTA speeds). SOLD
3.) Losi Comp Crawler - Purchased new. I have heard horror stories about CVDs and motor temps, but I must have reassembled mine correctly because i don't have any of those issues. I run a Novak Goat 2S and 18.5 crawler motor, JR 9100T servo, CC BEC, Micro DIG servo, Internal shock springs, Proline Chisel tires, NIB Proline 2 stage foams, 2 crawler sized lipos... I have thoroughly enjoyed tweaking this rig. It is very capable and reliable, I just don't use it much anymore. Check out Del Monte's thread on rccrawler to see the full potential of his crawler. SOLD.
4.) TQ Racing SX10 SC Pro Roller - I have driven this truck very little. Like new condition and even comes with an unpainted shell. It has AKA Wishbone tires F/R, a painted body I used to try it out. I had a Blitz last year and hated it. The TQ is far superior, IMO. I am on a 4WD phase right now. This car will be getting replaced with a Hyper 10tt or maybe a 4WD SC. =) SOLD.
I am open to trades for a Hyper 10tt or Losi LST2 or XXL. Please no Xbox, other nitro, or on-road cars (local track is closing). Feel free to PM me any questions or reasonable offers..
1.) Xray T2 and T2 007 US-Spec. I first bought the 007 used along with all the spare parts. Then I got a chassis off RC Tech and managed to build a second car from the spare parts. I imagine I have close to enough parts to build a third car or to keep these two cars running for several seasons. Easily $350 worth of spare parts. The cars have many upgrades already including aluminum hubs, lipo battery bars, sway bar sets. $350 for everything.
2.) Kyosho TF-5 Stallion - Another car I bought used and raced VTA. I won't be heart broken if it doesn't sell. It is gorgeous just to look. I do have NIB spares but I have never broken a part (plus side to VTA speeds). SOLD
3.) Losi Comp Crawler - Purchased new. I have heard horror stories about CVDs and motor temps, but I must have reassembled mine correctly because i don't have any of those issues. I run a Novak Goat 2S and 18.5 crawler motor, JR 9100T servo, CC BEC, Micro DIG servo, Internal shock springs, Proline Chisel tires, NIB Proline 2 stage foams, 2 crawler sized lipos... I have thoroughly enjoyed tweaking this rig. It is very capable and reliable, I just don't use it much anymore. Check out Del Monte's thread on rccrawler to see the full potential of his crawler. SOLD.
4.) TQ Racing SX10 SC Pro Roller - I have driven this truck very little. Like new condition and even comes with an unpainted shell. It has AKA Wishbone tires F/R, a painted body I used to try it out. I had a Blitz last year and hated it. The TQ is far superior, IMO. I am on a 4WD phase right now. This car will be getting replaced with a Hyper 10tt or maybe a 4WD SC. =) SOLD.
I am open to trades for a Hyper 10tt or Losi LST2 or XXL. Please no Xbox, other nitro, or on-road cars (local track is closing). Feel free to PM me any questions or reasonable offers..
Last edited by Rara; 03-04-2011 at 09:33 AM.
#5
tq
u have pm
#6
I have replied to all PM's. Thanks for looking. I have plenty of servos in excellent condition I can add to any of the cars for a little extra coin.
JR Z650M - The like new LST2 I bought is running a dual steering setup with these guys. I think I am going single servo.
JR Z4750 - Throttle servo on the LST2. I am converting to electric so no need for it.
JR 8711 - Available or will go in the LST2.
Savox SC-1258TG - Still shrink wrapped. Got a little carried away in the Savox trade in program.
I have a few motors also available for an extra fee.
Novak 7.5 Light - I got it for my Durango but the servo horn barely hits the back of the motor. So I switched to a Ballistic. Honestly, it has about 3 minutes of run time. I was checking motor temp when I realized there was a slight interference issue.
Castle 5700 - I ran this in the Durango as well. Might switch back to it, but it is available if someone has a need.
Castle 1717 and 1520 or Tekin T8 - Haha.. j/k The 1717 is pegged for my new LST2 project and the 1520 goes back in my truggy.
JR Z650M - The like new LST2 I bought is running a dual steering setup with these guys. I think I am going single servo.
JR Z4750 - Throttle servo on the LST2. I am converting to electric so no need for it.
JR 8711 - Available or will go in the LST2.
Savox SC-1258TG - Still shrink wrapped. Got a little carried away in the Savox trade in program.
I have a few motors also available for an extra fee.
Novak 7.5 Light - I got it for my Durango but the servo horn barely hits the back of the motor. So I switched to a Ballistic. Honestly, it has about 3 minutes of run time. I was checking motor temp when I realized there was a slight interference issue.
Castle 5700 - I ran this in the Durango as well. Might switch back to it, but it is available if someone has a need.
Castle 1717 and 1520 or Tekin T8 - Haha.. j/k The 1717 is pegged for my new LST2 project and the 1520 goes back in my truggy.
#7
pm sent
pm sent
#8
payment sent Thanks
#12
sent you pm about the xrays