FS: ARTR AE RC8T E-Conversion
10-30-2010, 11:47 AM
#1
FS: ARTR AE RC8T E-Conversion
I converted my RC8T to electric with intentions of racing it this last summer and then got caught up in the Short Course craze so it has seen the track 1 time for 3 practice runs and has been collecting dust ever since. This is set up to run both packs at once for those long mains with the nitro guys. Needs to find a new home. Here's what I have:
AE RC8T-E conversion
Tekin RX8(TT2300) and 1350 KV Redline Truggy Motor (TT2364)
Tekin Hotwire
2 Set of Panther clay Switch 2.0 (90% and 80% tread left) I used these when it was still nitro
1 set of AKA Cityblocks (60% tread left) Ran these for electric testing
1 set of Proline Crime Fighters brand new
JR Racing 9100T High Torque Servo
1 Proline Shift Body (clear) new
1 Old painted body from when it was nitro to get you going
Front and Rear AE spring Kit
Box of spare parts (some new some used but all usable if something breaks) box not included
Extra 5mm pinions and extra spur gear
7k,10k,15k and 30k diff fluids
2 winforce 35c 3000 mah 6S Lipos (3 cycles only on each pack)
King Headz Chassis Braces and front stearing knuckles
Just add your radio and you're racing. Take SOLD shipped + Paypal (lower 48 only). Not looking to seperate the package at this time and I'm currently not interested in any trades unless it's for a Jammin SCRT-10 or a Hyper 10 SC in similiar condition (artr just add radio, extra parts and tires and truck overall in used but good condition). If you have any questions or would like more pics you can email me at: [email protected]. That is the quickest way to get a response.
Thanks,
Don
AE RC8T-E conversion
Tekin RX8(TT2300) and 1350 KV Redline Truggy Motor (TT2364)
Tekin Hotwire
2 Set of Panther clay Switch 2.0 (90% and 80% tread left) I used these when it was still nitro
1 set of AKA Cityblocks (60% tread left) Ran these for electric testing
1 set of Proline Crime Fighters brand new
JR Racing 9100T High Torque Servo
1 Proline Shift Body (clear) new
1 Old painted body from when it was nitro to get you going
Front and Rear AE spring Kit
Box of spare parts (some new some used but all usable if something breaks) box not included
Extra 5mm pinions and extra spur gear
7k,10k,15k and 30k diff fluids
2 winforce 35c 3000 mah 6S Lipos (3 cycles only on each pack)
King Headz Chassis Braces and front stearing knuckles
Just add your radio and you're racing. Take SOLD shipped + Paypal (lower 48 only). Not looking to seperate the package at this time and I'm currently not interested in any trades unless it's for a Jammin SCRT-10 or a Hyper 10 SC in similiar condition (artr just add radio, extra parts and tires and truck overall in used but good condition). If you have any questions or would like more pics you can email me at: [email protected]. That is the quickest way to get a response.
Thanks,
Don
Last edited by drhodes1989; 12-11-2010 at 01:32 AM. Reason: Sold
10-31-2010, 06:53 PM
#2
31 hour bump
10-31-2010, 07:25 PM
#3
I have a similar set up this thing rocks, someone buy a bullet proof truggy off the man.
11-05-2010, 10:33 PM
#4
How much for the hotwire?
11-05-2010, 10:39 PM
#5
Thanks for looking but I'm currently not interested in parting the package out yet.
12-07-2010, 05:43 AM
#6
Christmas bump..
12-07-2010, 09:50 AM
#7
Added a trade offer if anyone is interested.
12-07-2010, 10:09 AM
#9
I purchased the esc/motor combo back in early March. I didn't know that they came out with a new case but if they just came out with it then no it wouldn't be the 3 hole case. Hope that helps.
12-07-2010, 05:29 PM
#10
All pm's replied to. Still for sale or trade
12-08-2010, 05:28 AM
#11
Price lowered.
12-10-2010, 03:22 AM
#13
Morning bump.
12-10-2010, 03:34 AM
#14
Tech Fanatic
iTrader: (75)
Can you send me more pictures of your truggy, close ups of everything including the bottom of the chassis?
I'm very interested in your RC8T,
Please send to my email address:
[email protected]
Is your truggy a factory team kit?
I'm very interested in your RC8T,
Please send to my email address:
[email protected]
Is your truggy a factory team kit?
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
