KO EX-10 and Spectrum
#19
Tech Apprentice
I just drilled out my antenna hole very slow one size at a time until i got it to where it holds the antenna snug. It holds very well and i didnt need a screw or glue to hold it in place.
#22
Tech Elite
iTrader: (33)
Ok so im thinking of doing this Mod. Need to make radio lighter and want to remove the heavy arial and put a Li Po in it.
Question i have is how do you connect the arial wire back to the Spectrum Modual? Do you drill a small hole through the case? Is there enough wire to route it back from the new location.? I have a Mars R.
I have pulled the modual apart and there is very little wire in it.
Thanks.
Question i have is how do you connect the arial wire back to the Spectrum Modual? Do you drill a small hole through the case? Is there enough wire to route it back from the new location.? I have a Mars R.
I have pulled the modual apart and there is very little wire in it.
Thanks.
#23
Tech Champion
iTrader: (125)
Ok so im thinking of doing this Mod. Need to make radio lighter and want to remove the heavy arial and put a Li Po in it.
Question i have is how do you connect the arial wire back to the Spectrum Modual? Do you drill a small hole through the case? Is there enough wire to route it back from the new location.? I have a Mars R.
I have pulled the modual apart and there is very little wire in it.
Thanks.
Question i have is how do you connect the arial wire back to the Spectrum Modual? Do you drill a small hole through the case? Is there enough wire to route it back from the new location.? I have a Mars R.
I have pulled the modual apart and there is very little wire in it.
Thanks.
#24
Tech Elite
iTrader: (33)
I may drill hole in the board later.
It looks so much better with the origanal location. Where do you get plugs for the hole left in the modual??
Why is there 2 arieal sockets for the spectrum and do both work????
Thanks. Mark.
#25
Tech Elite
iTrader: (33)
Well i have stuft uped my spectrum,well kind of.
I did this mod to my Mars and all seemed well but had to extend the wire to the spectrum module.
It all works till i get about 10 mtrs away and than loose all range.
Ive checked all connections and are fine. I think it is because i used standard antenna wire and the spectrum runs at 2.4 ghz. My mate thinks its a special wire to handle the 2.4 ghz.
PLEASE HELP anyone.
I did this mod to my Mars and all seemed well but had to extend the wire to the spectrum module.
It all works till i get about 10 mtrs away and than loose all range.
Ive checked all connections and are fine. I think it is because i used standard antenna wire and the spectrum runs at 2.4 ghz. My mate thinks its a special wire to handle the 2.4 ghz.
PLEASE HELP anyone.