Durango DEX210 Thread
New "B" parts
Here you go: http://www.team-durango.com/part-inf...artNo=TD330578
Yep, stock hingepins without the pivot balls. May need a shim depending on what kickup is used.
Yep, stock hingepins without the pivot balls. May need a shim depending on what kickup is used.
Mark Smith
Tech Regular
iTrader: (7)
Making the return back to my 210. I had planned to wait out for a +8 alloy chassis back in December when I broke my dimec20 chassis, unfortunately it turned into a 6month break from everything RC. But i'm finally back, this time with a new Tresrey +10 chassis that was delivered today. Can't wait to get back out on the track, hopefully I haven't forgotten how to drive.
Tech Elite
iTrader: (125)
Guys. What 12mm hex will give best fit in front/rear with say AKA front/rear wheels?Have tons of these mounted up and would like to use them.
Tech Fanatic
iTrader: (18)
Look forward to the new chassis, whenever it's available. I noticed right away that the chassis is pre-machined for the 2mm lowered RR hanger. Also, it looks like the rear droop screw stop might be machined as well, that would help with running less anti-squat if you run the shocks to the back. Those are two places I've had to dremel on the current DIMEC chassis.
Tech Fanatic
iTrader: (18)
Thanks for the link! I tried all day to find these new parts here in the states with no luck. Great Planes has no listings for the new numbers. Tower has no listings. I really would like to get this new stuff SOOOO Where Jonny5?? Where can one aquire such parts?? Looking for the new +8 "B"Chassis,Front bulkhead and RF/RR pin blocks and motor guard. The Durango site says these parts are available in the states through Great Planes. Thanks in advance for the info
Mark Smith
Mark Smith
I would expect them to be in stock at Tower very soon, which will be much cheaper than an overseas order.
Hi guys are the durango wheels the only ones that fit the dex 210?
Thanks!
Thanks!
Tech Master
iTrader: (27)
http://www.deracing.net/store/index....y&path=149_166
I personally only run the TD wheels and they hold up very well.
DE makes wheels that fit the DEX210 as well:
http://www.deracing.net/store/index....y&path=149_166
I personally only run the TD wheels and they hold up very well.
http://www.deracing.net/store/index....y&path=149_166
I personally only run the TD wheels and they hold up very well.
You can use a 12mm hex adapter from the B4 from Yaiba, JC, or Avid to use your existing rears. I'm not aware of any conversion to use the Losi fronts, though you can do a conversion to use AE/Kyosho 12mm fronts using the spindle assembly from the Durango ST/SC and a 12mm hex adapter.
As of today, I believe the only place to get them is the TD site. The plus to that is if you order today, you have it tomorrow. The big downside is it's overnight air freight from Europe at a cost of $50.
I would expect them to be in stock at Tower very soon, which will be much cheaper than an overseas order.
I would expect them to be in stock at Tower very soon, which will be much cheaper than an overseas order.
Mark Smith
Tech Champion
iTrader: (79)
all of the chassis parts are available, through Great Planes. They are in stock. I ordered both DEX210 buggy, and DESC210 truck chassis parts as required. The option blocks are not available. You cannot find the part # by a quick search, the parts are located under the kit replacement parts. I dont know why they cant be found otherwise.
Anyone try to mod the AVID Triad slipper on their Rango?
Tech Elite
iTrader: (112)