FS: Associated Factory Team B44, spares, tires, Hacker 6.5!
#1
FS/FT: Associated Factory Team B44, spares, tires, Hacker 6.5!
I have an excellent condition Associated B44 Factory Team edition with a ton of spares (A arms, diff cases, wing mounts, shock shafts, shock caps, etc. lots of parts), 6 sets of tires (two half sets) most in very good/race-worthy condition, a Hacker 6.5. It also has the lipo tray and CNC'd aluminum lipo plates that go under the saddle packs to counter balance the weight from NiMH to lipo (they act as a heat sink for the batteries too). The car also has a full set of Avid bearings.
I have never run this car anywhere but The Clay Pit (indoor clay track), so it is extremely clean. The body and wing have the usual racing wear, not perfect but certainly usable. I did have to put some extra holes in the body for ventilation as all the grip and braking at The Pit was causing my ESC to thermal.
The only damage on the car right now is from a collision during a race. The front shock tower was cracked. Because it happened at a race and the shop was out of them, I CA glued it and ran it like that. I did buy another shock tower and have a brand new one but as the cracked one never broke all the way through where it was glued, I just left it on keeping the new one as a spare.
I'm not sure what else to say about this car other than I really did enjoy it and it was very durable for me. I've had no issues with it at all. Anyone that buys it, especially if they are going to The Pit, will have a great time with it.
I'm looking to get SOLD for the roller with the Hacker 6.5 and all 6 sets of tires and spares. Not looking to break this up at this time.
I am also looking for a Tekin RX8 speedo/motor combo (1400 or 1700kv), or a really killer condition R/C boat, brushless or nitro, but it needs to be in excellent shape.
I will gladly meet anyone in the San Antonio/Austin area, or just bring it with me to The Pit any time I race up there (which is fairly often).
If anyone has any questions feel free to post here or PM me.
Thanks!
I have never run this car anywhere but The Clay Pit (indoor clay track), so it is extremely clean. The body and wing have the usual racing wear, not perfect but certainly usable. I did have to put some extra holes in the body for ventilation as all the grip and braking at The Pit was causing my ESC to thermal.
The only damage on the car right now is from a collision during a race. The front shock tower was cracked. Because it happened at a race and the shop was out of them, I CA glued it and ran it like that. I did buy another shock tower and have a brand new one but as the cracked one never broke all the way through where it was glued, I just left it on keeping the new one as a spare.
I'm not sure what else to say about this car other than I really did enjoy it and it was very durable for me. I've had no issues with it at all. Anyone that buys it, especially if they are going to The Pit, will have a great time with it.
I'm looking to get SOLD for the roller with the Hacker 6.5 and all 6 sets of tires and spares. Not looking to break this up at this time.
I am also looking for a Tekin RX8 speedo/motor combo (1400 or 1700kv), or a really killer condition R/C boat, brushless or nitro, but it needs to be in excellent shape.
I will gladly meet anyone in the San Antonio/Austin area, or just bring it with me to The Pit any time I race up there (which is fairly often).
If anyone has any questions feel free to post here or PM me.
Thanks!
Last edited by heavyjeffd; 10-17-2010 at 08:26 PM.
#2
Daily bump.
#3
#4
pm sent.
thx
thx
#5
Bumperoo.
#6
#7
Bumpy
#8
Bump.
#9
Bumperoo.
#10
Bumperooski.
#11
Bump!
Someone buy me or trade for me!!
Someone buy me or trade for me!!
#12
Trades
that are you looking to trade for?
#13
Hey there.
Looking for a similarly packaged nitro touring car, prerrably XRay or Serpent, maybe Associated if the deal was right.
Looking for a similarly packaged nitro touring car, prerrably XRay or Serpent, maybe Associated if the deal was right.
#14
Bumpee.
#15
Bump