Ask Paul Lemieux, RC America/MOTIV/Gravity RC
#2282
Yup, the gear seems pretty good, you may be able to go up one tooth on the pinion or maybe split the difference by going to a 112 from your 114. Get the best fan on the motor possible and boost it up with the speedo. I would keep the boost and the turbo timing the same. I dont know if the values are the same from my speedo to yours but i would start with 15deg each and work up from their. 180deg is safe, 190 is ok, 200+ and your pushing the envelope.
#2283
Hi Paul-Brian from TS,
Quick question about the XB4--do you set yours up on a station??
I understand the importance of a station for on-road but many times I hear people saying it doesn't matter as much for off-road. If you do use a station for the XB I assume its the Hudy 108905??
Thanks!
Quick question about the XB4--do you set yours up on a station??
I understand the importance of a station for on-road but many times I hear people saying it doesn't matter as much for off-road. If you do use a station for the XB I assume its the Hudy 108905??
Thanks!
#2284
Tech Elite
iTrader: (49)
Yup, the gear seems pretty good, you may be able to go up one tooth on the pinion or maybe split the difference by going to a 112 from your 114. Get the best fan on the motor possible and boost it up with the speedo. I would keep the boost and the turbo timing the same. I dont know if the values are the same from my speedo to yours but i would start with 15deg each and work up from their. 180deg is safe, 190 is ok, 200+ and your pushing the envelope.
#2285
Hi Paul-Brian from TS,
Quick question about the XB4--do you set yours up on a station??
I understand the importance of a station for on-road but many times I hear people saying it doesn't matter as much for off-road. If you do use a station for the XB I assume its the Hudy 108905??
Thanks!
Quick question about the XB4--do you set yours up on a station??
I understand the importance of a station for on-road but many times I hear people saying it doesn't matter as much for off-road. If you do use a station for the XB I assume its the Hudy 108905??
Thanks!
yup the 108905 is the system and i think you might need the 108928 shim as well for the rear axle's
I see the pictures from ETS and Worlds and its hard to tell what fans top guys are running on their motors. I know the rule in some parts of the world allows 40 mm fans, and for us under ROAR its 30 mm max. Do you have any suggestions? I'm working to make sure I keep my Reedy 4.0/5.0 and HW 3.1 cool for our last 2 series races later this year.
thanks
#2286
Quick question about the new NT1 shocks, I measured them against the T4 shock and are identical from what I can see. The only difference was overall length my guess is due to a longer shock shaft. The specs for the NT1 says they're almost identical except for the shock body and the shaft, what's the difference in the body? And can. Use the T4 shock if I just purchase the new NT1 shock shaft?
Want to know because I always buy an extra set of shocks when I purchase a new kit and already have 2 extra sets for my T4 (3 total), I build them soft, medium and hard so I don't have to do it in the pit and waste time just to not like the feel and have to build all over again.
Want to know because I always buy an extra set of shocks when I purchase a new kit and already have 2 extra sets for my T4 (3 total), I build them soft, medium and hard so I don't have to do it in the pit and waste time just to not like the feel and have to build all over again.
#2287
The best fans that i have found are the Superior hobbies one's, the R1 wurks ones and the Gravity RC fan. i feel that the performance of all three are virtually the same, R1 and Gravity are almost the exact same. At Reedy, Marc, Victor and Christopher all went home with one of those three fans and seemed impressed by the flow of them all. I would definitely suggest getting one of those three if you don't already have.
thanks
thanks
#2288
Tech Master
iTrader: (5)
Quick question about the new NT1 shocks, I measured them against the T4 shock and are identical from what I can see. The only difference was overall length my guess is due to a longer shock shaft. The specs for the NT1 says they're almost identical except for the shock body and the shaft, what's the difference in the body? And can. Use the T4 shock if I just purchase the new NT1 shock shaft?
Want to know because I always buy an extra set of shocks when I purchase a new kit and already have 2 extra sets for my T4 (3 total), I build them soft, medium and hard so I don't have to do it in the pit and waste time just to not like the feel and have to build all over again.
Want to know because I always buy an extra set of shocks when I purchase a new kit and already have 2 extra sets for my T4 (3 total), I build them soft, medium and hard so I don't have to do it in the pit and waste time just to not like the feel and have to build all over again.
#2289
#2290
Hi Paul, I just wanted to say thank you for the interview it was the bomb! Just to note all of you guys that frequent this thread have a lot to be proud and thankful of. This guy is a great champion and promoter of the sport of rc racing. Keep on rising to the top my friend. We need more like yourself. " The RC Guru " for DialedNTV / DialedNRC the Comcasty and Verizon Fios Cable TV networks
#2291
Hi Paul, I just wanted to say thank you for the interview it was the bomb! Just to note all of you guys that frequent this thread have a lot to be proud and thankful of. This guy is a great champion and promoter of the sport of rc racing. Keep on rising to the top my friend. We need more like yourself. " The RC Guru " for DialedNTV / DialedNRC the Comcasty and Verizon Fios Cable TV networks
#2292
Quick question about the new NT1 shocks, I measured them against the T4 shock and are identical from what I can see. The only difference was overall length my guess is due to a longer shock shaft. The specs for the NT1 says they're almost identical except for the shock body and the shaft, what's the difference in the body? And can. Use the T4 shock if I just purchase the new NT1 shock shaft?
Want to know because I always buy an extra set of shocks when I purchase a new kit and already have 2 extra sets for my T4 (3 total), I build them soft, medium and hard so I don't have to do it in the pit and waste time just to not like the feel and have to build all over again.
Want to know because I always buy an extra set of shocks when I purchase a new kit and already have 2 extra sets for my T4 (3 total), I build them soft, medium and hard so I don't have to do it in the pit and waste time just to not like the feel and have to build all over again.
Thanks
Hi Paul, I just wanted to say thank you for the interview it was the bomb! Just to note all of you guys that frequent this thread have a lot to be proud and thankful of. This guy is a great champion and promoter of the sport of rc racing. Keep on rising to the top my friend. We need more like yourself. " The RC Guru " for DialedNTV / DialedNRC the Comcasty and Verizon Fios Cable TV networks
talk to you soon
#2293
The part numbers are different as far as I can see, but I'm not sure f they're different because the T4 part numbers are listed in a set of 2 and the NT1 are listed separately.
IMO they're the same, only difference s the shaft, which is probably longer.
Can't wait till I get the new NT1, the orange makes it look sick
IMO they're the same, only difference s the shaft, which is probably longer.
Can't wait till I get the new NT1, the orange makes it look sick
#2294
Tech Adept
iTrader: (5)
Join Date: Apr 2012
Location: Everett WA in the Summer Mesa AZ in the Winter
Posts: 128
Trader Rating: 5 (100%+)
The best fans that i have found are the Superior hobbies one's, the R1 wurks ones and the Gravity RC fan. i feel that the performance of all three are virtually the same, R1 and Gravity are almost the exact same. At Reedy, Marc, Victor and Christopher all went home with one of those three fans and seemed impressed by the flow of them all. I would definitely suggest getting one of those three if you don't already have.
thanks
#2295
The part numbers are different as far as I can see, but I'm not sure f they're different because the T4 part numbers are listed in a set of 2 and the NT1 are listed separately.
IMO they're the same, only difference s the shaft, which is probably longer.
Can't wait till I get the new NT1, the orange makes it look sick
IMO they're the same, only difference s the shaft, which is probably longer.
Can't wait till I get the new NT1, the orange makes it look sick
Thanks
Hi, Gravity does sell a fan. It is PN GRC:350, A limited amount are available in the first batch, so they may be hard to find. I know RC america has them in stock.
Thanks