Blitz Touring Car bodies
#76
How are you all measuring the rear wheel cutouts? The front cut outs looked great as there are lines for the cutouts. There's no lines on the rear at least on the LSF. I had to elongate the front wheel wells which look nasty now lol. I used to be able to mount bodies but I lost my touch.
#77
Tech Master
iTrader: (17)
How are you all measuring the rear wheel cutouts? The front cut outs looked great as there are lines for the cutouts. There's no lines on the rear at least on the LSF. I had to elongate the front wheel wells which look nasty now lol. I used to be able to mount bodies but I lost my touch.
#78
Tech Master
iTrader: (6)
https://www.hobbytown.com/Shop/HCAR0...Circle-Cutter/
Put a black dot where the axle hits the lexan.
Put a black dot where the axle hits the lexan.
#79
#80
LOVE it!!
#81
Tech Initiate
Hi guys!
Which body would you request for an indoor carpet track (pk racing circuit)?
How do MS6 LSF GSF GSF2 compare?
What are the main differences between the LSF and the GSF?
Which body would you request for an indoor carpet track (pk racing circuit)?
How do MS6 LSF GSF GSF2 compare?
What are the main differences between the LSF and the GSF?
Last edited by Cabocuts; 05-12-2016 at 01:52 PM.
#82
Gsf or gsf2 0.5mm..... I just hope blitz could make 0.5mm F1 and wgt bodies to help fight traction roll.....
#83
Hey guys, need some advices about 200mm sedan bodies. Wich models should i choose from for racing. So fr example 3 types from Blitz range. Thx.
#84
Blitz 200mm Cruze(0.7mm), RS4(0.6mm) if you can find it, Saab 93(0.6mm) , are all decent....
#86
Anyone had issues with the wrong window masks being sent out?
Brought the WRX from hobbyking and the window masks were wrong, tried to let them know and they fobbed me off and said I need to do a warranty claim
Brought the WRX from hobbyking and the window masks were wrong, tried to let them know and they fobbed me off and said I need to do a warranty claim
#87
Tech Master
iTrader: (15)
Interesting. Haven't had issues with wrong masking. Blitz bodies come with an off white almost yellow masking(paper like, not vinyl like PF). What color is yours? If it is white than I'm guessing its a mistake on Hobbykings part(possibly an RMA on their end from previous purchase). Hope you get it worked out. You can always save the hassle of return and mask it yourself. Probably not what you want to hear though.
#88
The yellow paper worked just as good as the protoform white masking tape. You'll be throwing it away after painting anyway...
Congrats to Lars Hoppe on his ETS pro stock win with the lsf body and ARC R11 chassis kit... Blitz and ARC seem to work very well together: the other competitors were left in the dust....
Congrats to Lars Hoppe on his ETS pro stock win with the lsf body and ARC R11 chassis kit... Blitz and ARC seem to work very well together: the other competitors were left in the dust....
#89
Tech Adept
Blitz bodies comes with body marking holes for ARC R11. So, prefect alignment every time. For asphalt track, I like to use either LSF or GSF for better steering. If the track is lose, I use XFR for more rear end traction, easier to drive. On lose track using GSF and XFR, can be 1sec different according from my experience. That's why I always keep a XFR ready just in case.
#90
Interesting. Haven't had issues with wrong masking. Blitz bodies come with an off white almost yellow masking(paper like, not vinyl like PF). What color is yours? If it is white than I'm guessing its a mistake on Hobbykings part(possibly an RMA on their end from previous purchase). Hope you get it worked out. You can always save the hassle of return and mask it yourself. Probably not what you want to hear though.
Front window was right but the side & rear windows were completely wrong.
Also the side windows were "pre cut" for the gap in between the Windows, (b piller?)
Wasn't really a issue, I just liquid masked them up, I just wanted hobbyking to know there was a issue but obviously they don't give a shit.