karrar55

i dont have a new pllug but im not sure how hold the motor is. it doesnt look old and it doesnt look new. does the throttle have to be open about 2 millie meters or does have to be wide opened?

Gearhead racer

OK well sometimes it take a little throttle to get it going. It should be about a credit card thickness in order to idle.

karrar55

ya thats what i got it at. guess im out of luck.

Gearhead racer

Do one other thing for me, spin the flywheel with your fingers and tell me if there's any resistance.

karrar55

yes their is. when i spin it the truck wants to move foward

imaxx21

iTrader: (1)

thats not right

sounds like the clutch is stuck, prolly why it wont start

Gearhead racer

OH....well it sounds like you have a clutch problem. Either its bearings or a clutch spring is bad. It shouldnt try to move forward when you spin it, it means your clutch bell is stuck. If it set for a while it probly would be the bearings are rusted or dirty. that will make it hard to get it started

karrar55

well under the air filter is a gear that when u turn it, it will turn the engine. then after that theres a black metal looking cylinder thats half inch in diameter that connected to a small gear and that small gear is connected to a big gear. that small gear moves freely

Gearhead racer

In front of your flywheel is black gear that is attached to the motor that's your clutch bell and the bigger gear is your spur gear.

karrar55

im try to post a video pf me tryn to start it and ima show u the flywheel

Gearhead racer

ok

karrar55

taking a while sorry

Gearhead racer

Well pal, would love to continue help you but I'm about a sleep and i have along day ahead of me, so i have get to bed for what few hours i have left. Keep me posted and maybe someone can take the reins to continue to help you.
Keep me posted

Tyler

karrar55

ok thanks

karrar55

FINALLLLYYY haha....if u want more vids i can make more(this time i can do it real FAST)