Turnigy TrackStar Motors
#361
Is anyone running a 10.5?? Could someone recommend a starting fdr?? Small to medium outdoor asphalt track. 80ft straight.
#363
Tech Adept
ESC Radon + 5.5T trackstar:
https://www.youtube.com/watch?v=qOAhn_I_wxM
+ YouTube Video | |
Your settings? THANK YOU in advance,
#364
Tech Elite
iTrader: (13)
Will check setting today and send them to you.
We in Holland run the 10.5 in the Pro10 class with boost and or turbo.
I am running it with a HW 2.1 esc and running it with 78/19->22 pinion depending on tire diameter.
Good speed and it ripps out of the corners very good
Some movies from the stock races here in Holland
Regards Roy
https://www.youtube.com/watch?v=6lUZ5UNKLRA
https://www.youtube.com/watch?v=OD_FCe-FlL0
We in Holland run the 10.5 in the Pro10 class with boost and or turbo.
I am running it with a HW 2.1 esc and running it with 78/19->22 pinion depending on tire diameter.
Good speed and it ripps out of the corners very good
Some movies from the stock races here in Holland
Regards Roy
https://www.youtube.com/watch?v=6lUZ5UNKLRA
https://www.youtube.com/watch?v=OD_FCe-FlL0
Good news! Blue car with default settings 78/15 (48P)
ESC Radon + 5.5T trackstar:
https://www.youtube.com/watch?v=qOAhn_I_wxM
Your settings? THANK YOU in advance,
ESC Radon + 5.5T trackstar:
https://www.youtube.com/watch?v=qOAhn_I_wxM
+ YouTube Video | |
Your settings? THANK YOU in advance,
#365
Tech Elite
iTrader: (13)
This is what i am running with the trackstar 10.5 silvercan motor in the pro10
Dragbrake: 5%
Voltage protection: 3V/cell
DRRS punch: lvl 6
Brake force: 60%
Reverse force: 100%
Initial brake: Drag brake
Neutral range: 6%
Boost timing: 64
Turbo slope: 3
Overheat protection: Enable
Turbo timing: 1
Start RPM: 1000
Turbo delay: Off
Timing acc: 450
Hope this will help you some.
Motor is after 7 minutes 55 to 65 degrees celcius.
Regards Roy
Dragbrake: 5%
Voltage protection: 3V/cell
DRRS punch: lvl 6
Brake force: 60%
Reverse force: 100%
Initial brake: Drag brake
Neutral range: 6%
Boost timing: 64
Turbo slope: 3
Overheat protection: Enable
Turbo timing: 1
Start RPM: 1000
Turbo delay: Off
Timing acc: 450
Hope this will help you some.
Motor is after 7 minutes 55 to 65 degrees celcius.
Regards Roy
#366
Tech Adept
Thanks Roy, very interesting settings (like: Start RPM: 1000). I hope one day will go to Mach or Benelux race.
I like trackstar motor and works great with ESC TeampPowers Radon anyone have a setting for 5.5T (PRO10)?
regards
I like trackstar motor and works great with ESC TeampPowers Radon anyone have a setting for 5.5T (PRO10)?
regards
#367
Tech Fanatic
For what it's worth, HK now lists these motors as "ROAR Approved" on their site.
#368
Tech Elite
iTrader: (13)
Start with no timing or boost and drive it till you find that you can go faster.
If so, try first a bigger rollout before you go fidling with the esc settings as a mod motor is much smoother then a stock motor with timing and boost.
If everything is going like you want it to, apply some timing but start low.
Temp motor after 3 minutes and work your way from there.
Regards Roy
If so, try first a bigger rollout before you go fidling with the esc settings as a mod motor is much smoother then a stock motor with timing and boost.
If everything is going like you want it to, apply some timing but start low.
Temp motor after 3 minutes and work your way from there.
Regards Roy
#369
I currently used reedy sonic machine 1 and Novak ballistics.
17.5 touring and 21.5 VTA.
How does the track star compare to both of these motors on carpet?
17.5 touring and 21.5 VTA.
How does the track star compare to both of these motors on carpet?