Axiom Motors
#1216
hey dave...i got like all my motors and stuff i think...but no pakc...when are fresh cells comin in?
#1218
Originally Posted by dgullickson
So far at the April Fools Race in Utah, Axiom is TQ in Truck
Hopefully after numorous IM's and e-mails he will do what I told him to do so he can clear a jump
Hopefully after numorous IM's and e-mails he will do what I told him to do so he can clear a jump
David, the gearing change was much better as well as a prep item I just picked up from another driver this weekend, so things are much better in the truck. Buggy is fast too, but so is everyone else.
#1219
good luck
#1220
Final results were:
All A Main races
2nd in Stock Truck- CO27
4th Masters Truck- CO27
8th in Stock Buggy- Monster Stock
Buggy was my worst race, but as I said before, everyone was fast in that one and I got caught in a first turn tangle that sent me back. I am content with Masters since most there were running Lipo and 13.5 BL so it was somewhat difficult to do much more there. Stock truck actually just finished like we qualified, 1st thru 3rd retained their spots the whole way through the race.
It was a fun weekend and I want to thank David for the Motors. We had a guy there from Xtreme RC so there should be a write up for it in the mag in about a month.
Now time for some outdoor sedan racing!!
All A Main races
2nd in Stock Truck- CO27
4th Masters Truck- CO27
8th in Stock Buggy- Monster Stock
Buggy was my worst race, but as I said before, everyone was fast in that one and I got caught in a first turn tangle that sent me back. I am content with Masters since most there were running Lipo and 13.5 BL so it was somewhat difficult to do much more there. Stock truck actually just finished like we qualified, 1st thru 3rd retained their spots the whole way through the race.
It was a fun weekend and I want to thank David for the Motors. We had a guy there from Xtreme RC so there should be a write up for it in the mag in about a month.
Now time for some outdoor sedan racing!!
#1221
at K/N's trophy race this past sat. i ran 3rd in the B-main with Axiom power cant wait till u get the new cells only had 2 pks that were good enough to run , we were working on a new car and trying to get the rollout right but paid off with a nice finish after a yr+ off.what brush and spring combo do you guys like in the co27's and what amp draw is good out of these.
#1222
pm
dave i sent you a pm.....you just have to delete some messages before you can get it
#1223
Well im gunna try and trophy race it again this weekend ill let you know how i do.
#1226
Tech Champion
iTrader: (45)
By popular demand and as requested we will be carrying the H.A.R.D. Products very soon, just finished my order and will be sending it off and will be adding Products to the site within the Week, also we will be carrying Carbon Fiber Parts as well and those will be added maybe Tonight.
#1229
Tech Regular
iTrader: (13)
3/8 Thrust Bearings
Could you explan a little bnit more about the placement of these brgs?
And do you carry the 767 with a hole?
We have started to run the Oval series here in Florida and the local's tell me that is what I need!
Your thoughts on tuning a c027 for stock oval is always welcome!
thanks!
Jeff
And do you carry the 767 with a hole?
We have started to run the Oval series here in Florida and the local's tell me that is what I need!
Your thoughts on tuning a c027 for stock oval is always welcome!
thanks!
Jeff
#1230
Dave nice talking to you last night on the phone.keep me in tune on the batts when there ready.on the 22nd we'll need all we can.for a tight turn flat fast oval track would the co27 or the X motor be better and how does the roar epic compare.we'll be the only team axiom driver up there so we'll put all you help and ideas to use.thanks Craig