TT-01 Forum
#241
Originally Posted by imel24
good day i was just wondering, what's the most practical way to setup a tt-01 for rally???
I know for one that i'll be needing the rally block tires, after the tires what's next??? how do i increase the ride height suspension etc???
is there any particular tamiya model that i can swap parts from??? thanks in advance!!!
I know for one that i'll be needing the rally block tires, after the tires what's next??? how do i increase the ride height suspension etc???
is there any particular tamiya model that i can swap parts from??? thanks in advance!!!
#242
You won't get the TT-01 any higher than it is with the kit shocks, the suspension will only go down that far. Ride height is already substantial at 15+mm.
As it says on the TT-01 box - "On-road use only". Run it as a rally car if you like but don't expect it to run as well as one of the old TB-01 chassis which were designed for rally.
As it says on the TT-01 box - "On-road use only". Run it as a rally car if you like but don't expect it to run as well as one of the old TB-01 chassis which were designed for rally.
#243
One of our friends cut out the lower plate to allow more travel to the arms and then just put the longer lower shock eyelets on and ran it on our rally track. It ran really good. I would suggest making some kind of cover or trying to get the TB01 inner body set cover to fit.
#244
spur and pinions
i was just wondering what spur i would need for the following:
23t
24t
25t
and can u get a 26t or higher
see ya later
thanks
23t
24t
25t
and can u get a 26t or higher
see ya later
thanks
#245
think this would help
#246
thanks
thanks for that
#247
what chassis hop ups
what chassis hop ups would make my 18t
pinion
go faster than my friends 25t
without changings the gears
and we both have a tamiya sport tuned
would carbon fibre hop ups make it alot faster
pinion
go faster than my friends 25t
without changings the gears
and we both have a tamiya sport tuned
would carbon fibre hop ups make it alot faster
#248
Chassis parts don't make the car any faster in a straight line and cost a lot more than a pinion gear and the spur set. Just get the same gearing as him.
#249
thanks
so if i get the spurs and pinioin the same
will make the same speed
but is a lrp buggy special any faster than a sport tuned
would the hop ups like carbon fibre and stuff make it a bit better in corners
and what are the best tyres to buy for racing aat a rc car club
would i be able to make my tt-01 go faster than a ta-05 with a 540 in it
would gearing beat it
will make the same speed
but is a lrp buggy special any faster than a sport tuned
would the hop ups like carbon fibre and stuff make it a bit better in corners
and what are the best tyres to buy for racing aat a rc car club
would i be able to make my tt-01 go faster than a ta-05 with a 540 in it
would gearing beat it
#250
to get the speed you need to work wih the gearing. 55Spur and 25 pinion in a TT01 will yield the best results with a 540 motor, even better with a Sport tuned. just make sure you monitor the motor temps though, you don't want the motor to run too hot.
#251
what r the best tyres
whatar the best tyres u can buy for racing
i dont care how long they last but what give the best grip and good turning
i dont care how long they last but what give the best grip and good turning
#252
what about like a 26 27 28t pinion
how much more top speed would i get from 26t and pinion in it
#253
how more speed could i get out of my tt01 with a 26t and higher pinion in it
#254
u have to try on that dude. 25/55 is by far the best for sport tuned/540.
#255
thanks for the help
soo what motor can i get without going above a 540 sized motor go faster than a sport tuned
like a lrp buggy special or something
like a lrp buggy special or something