Reflex Suspension Dynamics (RSD) TC6 Upgrades (vertical ball studs, pistons,etc)
#782
Tech Regular
iTrader: (3)
Hey Cristian
Sorry I didnt get a chance to introduce myself at nationals. But I wanted to thank you for making great products that helped me have a successful first ROAR nationals (2nd in VTA, 2nd in B of 17.5 TC)
I was running springs, bladders, pistons, shock tower mounts and fan mounts on both cars. Thanks again
Sorry I didnt get a chance to introduce myself at nationals. But I wanted to thank you for making great products that helped me have a successful first ROAR nationals (2nd in VTA, 2nd in B of 17.5 TC)
I was running springs, bladders, pistons, shock tower mounts and fan mounts on both cars. Thanks again
#784
Hey Cristian
Sorry I didnt get a chance to introduce myself at nationals. But I wanted to thank you for making great products that helped me have a successful first ROAR nationals (2nd in VTA, 2nd in B of 17.5 TC)
I was running springs, bladders, pistons, shock tower mounts and fan mounts on both cars. Thanks again
Sorry I didnt get a chance to introduce myself at nationals. But I wanted to thank you for making great products that helped me have a successful first ROAR nationals (2nd in VTA, 2nd in B of 17.5 TC)
I was running springs, bladders, pistons, shock tower mounts and fan mounts on both cars. Thanks again
#785
Cristian, did you run the new chassie with the dual bellcrank or went standard?
#788
New Items - Tuning Kit and Motor Screws
Some people have been asking for these for a while, so we decided to release them now.
The Tuning Kit Includes the essential Tuning parts to get your TC6 or TC6.1 up to speed. It is sold at a 20% discount.
Just some good quality motor screws.
Not for the TC6, but a very useful Widening kit for your 1/10th scale F1's, that falls within ROAR rules.
The Tuning Kit Includes the essential Tuning parts to get your TC6 or TC6.1 up to speed. It is sold at a 20% discount.
Just some good quality motor screws.
Not for the TC6, but a very useful Widening kit for your 1/10th scale F1's, that falls within ROAR rules.
#790
The RSD Teal is the most comparable to the AE Green. They are very close. Our springs are just higher quality and typically more consistent. They tend to make the car smoother.
Yes, I do use axle hub spacers. Sometimes I use them to adjust my track width on the fly, sometimes I use them to fine tune my set-ups. A difference of just 1mm change at either end can take the car from oversteer to push.
Yes, I do use axle hub spacers. Sometimes I use them to adjust my track width on the fly, sometimes I use them to fine tune my set-ups. A difference of just 1mm change at either end can take the car from oversteer to push.
#791
Tech Master
iTrader: (70)
I have noticed some real improvements to my TC6's handling after installing first the pistons and bladders, and then a big improvement when I purchased a couple sets of springs to try. I have since purchased the other springs and these upgrades have made a huge difference in my car. Well done RSD!!
#792
Tech Fanatic
iTrader: (3)
The RSD Teal is the most comparable to the AE Green. They are very close. Our springs are just higher quality and typically more consistent. They tend to make the car smoother.
Yes, I do use axle hub spacers. Sometimes I use them to adjust my track width on the fly, sometimes I use them to fine tune my set-ups. A difference of just 1mm change at either end can take the car from oversteer to push.
Yes, I do use axle hub spacers. Sometimes I use them to adjust my track width on the fly, sometimes I use them to fine tune my set-ups. A difference of just 1mm change at either end can take the car from oversteer to push.