What's new @ Speed Tech R/C
#2717
Hi Guys,
We are happy to annouce that we are now an official dealer for SMC batteries. We have the latest batch of GP3300 35amp discharge packs (Stock and Modified racing specs) and we have the new IB3600 cells as well. For more info, click the link below:
SMC Matched Batteries
Steve Wang
We are happy to annouce that we are now an official dealer for SMC batteries. We have the latest batch of GP3300 35amp discharge packs (Stock and Modified racing specs) and we have the new IB3600 cells as well. For more info, click the link below:
SMC Matched Batteries
Steve Wang
Last edited by SpeedTech; 02-09-2005 at 07:51 AM.
#2718
Tech Initiate
Hi Steve, Do you know what the ABEC rating is for your 415 LW bearing kit? Thanks, Dominic
#2719
Originally posted by discodom
Hi Steve, Do you know what the ABEC rating is for your 415 LW bearing kit? Thanks, Dominic
Hi Steve, Do you know what the ABEC rating is for your 415 LW bearing kit? Thanks, Dominic
I believe they are ABEC 5 bearings. Honestly, through our testing and research, anything tighter in tolerance than ABEC 5 is actually a disadvantage in R/C simply because the components that we install these bearings in are not that precise (relatively speaking) so putting an ABEC 7 bearing (which some manufacture makes a big deal about) in a molded nylon part will most likely damage the bearings rather quickly, especially in an event of a crash.
Steve Wang
#2721
Tech Adept
HPI Pro 4
Hi Steve
Any idea when the 2mmHPI Pro 4 chassis will be back in stock?
Thanks
Neil
Any idea when the 2mmHPI Pro 4 chassis will be back in stock?
Thanks
Neil
#2723
Originally posted by Mr. Shookie
Yea Steve,
I haven;t gotten a shipping confirmation email yet on that conbined shipment.
Just wondering if MR UPS Driver will show up today?
Thanks,
Stpehen <><
Yea Steve,
I haven;t gotten a shipping confirmation email yet on that conbined shipment.
Just wondering if MR UPS Driver will show up today?
Thanks,
Stpehen <><
They were combined and shipped out, and should be arriving today. Let me know if you haven't seen anything, and I'll track it online for you
Steve Wang
#2724
Re: HPI Pro 4
Originally posted by ND
Hi Steve
Any idea when the 2mmHPI Pro 4 chassis will be back in stock?
Thanks
Neil
Hi Steve
Any idea when the 2mmHPI Pro 4 chassis will be back in stock?
Thanks
Neil
Steve Wang
#2725
Re: square product for pro4
Originally posted by Guo Chean
hey Steve Wong,
may i know that did you get the square motor mount for pro 4? i using HPI hop up motor mount but it not fit the motor with the pinion with the spur probably. so may i know can you get 1 for me? thanks
hey Steve Wong,
may i know that did you get the square motor mount for pro 4? i using HPI hop up motor mount but it not fit the motor with the pinion with the spur probably. so may i know can you get 1 for me? thanks
We can put that on our next order with Square.
Steve Wang
#2728
Steve,
I was wondering what the chances are of getting some CS 27's premounted on yellow dish wheels ? If not what yellow wheels do you recomend? The standard TO wheels on the premounts work well over here so I would need something equal in stiffness. Thanks
Also, do you accept Pay-Pal?
Brant
I was wondering what the chances are of getting some CS 27's premounted on yellow dish wheels ? If not what yellow wheels do you recomend? The standard TO wheels on the premounts work well over here so I would need something equal in stiffness. Thanks
Also, do you accept Pay-Pal?
Brant
#2729
Originally posted by RPage
Hey Steve,
Any idea when you will be getting EVO IV arms in?
Hey Steve,
Any idea when you will be getting EVO IV arms in?
Hopefully by the end of next week
Steve Wang
#2730
Originally posted by Guo Chean
hey Steve,
did you order the Hpi high traction arms, aluminium camber link or carbon fiber camber link for pro 4 it seem that very hard to get these stuff over U.S.A here.
hey Steve,
did you order the Hpi high traction arms, aluminium camber link or carbon fiber camber link for pro 4 it seem that very hard to get these stuff over U.S.A here.
The aluminum camber link from Square is currently in stock I believe, the HPI graphite camber link should be coming in on Monday. I'm not aware of the HPI High Traction Arms, but I"ll look into that.
Steve Wang