gsxr0311

iTrader: (19)

anybody know which side spring is the stiffist ? i got the three optional springs and i cant tell which is softest or hardest>

Qatmix

cheers for the feedback guys

I hope to make it a great blog for F1 racing. So if anyone else wants to contribute let me know

NiMo

Try holding 2 different springs end to end and start to squeeze them together (be careful they dont fly out of your fingers), usually the first to close is the softer.

robk

iTrader: (22)

Put them on the shaft of a screwdriver so they can't fly away

Si.Fennell

softest to hardest
black silver gold same for the front springs

gsxr0311

iTrader: (19)

thanks guys, thats what i thought. the silver and gold feel almost the same.

kryss

first of all, happy new year!
i found a tip:
In order to decrease gap between front wheel and axle, you can put diff disk spring (be care of the direction with bearing). it works perfectly

hectickurt

Quick question,
Do F104 rear wheels fit onto an F109 rear axle or do you have to change any parts?

Thanks in advance and happy new year to all

abe-racing

sure do,
we have them all in stock if you need anything...also the new 3racing rims and rim covers..search for us on google...

Pattojnr

iTrader: (19)

been looking at the 3 racing F109.
but there seems to be no parts for it. like front arms,etc.
i have read some of the forum, and i see some guys are using F103 parts.
ar the arms knuckles bearings and wings all compatable ? this is preventing me from purchasing the car at the moment. even 3racing site doesnt have the parts under the 109 listing. goes into F103 parts. so i am assuming some compatability here ? thanks.

robk

iTrader: (22)

Everything is f103 except the rear bulkhead and chassis, or the part can be changed out for f103 anyway.

Pattojnr

iTrader: (19)

Thanks Robk.

all ordered and some spares. i now own a F109

abe-racing

seems some people are struggling to get f109 spares, if theres anything you are struggling to get let me know we have 100% of them instock

Pattojnr

iTrader: (19)

it is more the lack of knowledge that F103 parts like the front arms and things are from F103. even your site only lists a few F109 parts then goes into F103 part numbers. so it is a little confusing at times.

Pattojnr

iTrader: (19)

is there a downloadable manual for this car ?
id like to flick some pages before it turns up.