125LikesYOKOMO Touring Car BD-8
04-04-2017, 07:49 PM
#436
Hi All,
Volker does not use the body clips to hold the adjustable body mounts in place but rather a pin, does any one know which? Looks like it doesn't wobble as much as with body clips.
Thanks for replying.
Volker does not use the body clips to hold the adjustable body mounts in place but rather a pin, does any one know which? Looks like it doesn't wobble as much as with body clips.
Thanks for replying.
04-06-2017, 08:17 PM
#437
Does yokomo make a fan mount for behind the motor??
04-06-2017, 08:22 PM
#438
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
Bammm
here you go buddy
NEW COOLING FAN MOUNT FOR BD8/BD7-2016
#B8-CFM, 11,90 EUR ($13 USD)
U ask...We answer
NEW COOLING FAN MOUNT FOR BD8/BD7-2016
#B8-CFM, 11,90 EUR ($13 USD)
U ask...We answer
04-08-2017, 09:43 PM
#439
Are there any geometry changes between the bd7 and bd8 steering blocks and c-hubs?
04-16-2017, 05:48 PM
#440
Hi All,
We have a question regarding the Droop measurement with the RTC installed.
How do you measure droop with the RTC installed?
I know how droop is measured regularly but with the knob on the bottom of the swing arm it is hard to get a correct measurement.
We have a question regarding the Droop measurement with the RTC installed.
How do you measure droop with the RTC installed?
I know how droop is measured regularly but with the knob on the bottom of the swing arm it is hard to get a correct measurement.
04-16-2017, 07:23 PM
#441
Does the PCS kit work for stock? Or will I still need stock upper deck?
04-16-2017, 07:33 PM
#442
Droop over ride height method is what I use. Ran the BD8 on asphalt last weekend and I'm liking the car on asphalt with RTC. Never had real luck with the BD8 until I used the carbon spur brace, pitch control and rear toe control. New upper deck that comes with pcs system works for blinky also.
Last edited by b20btec; 04-17-2017 at 06:50 AM.
04-16-2017, 07:34 PM
#443
04-16-2017, 08:10 PM
#444
Where can the PCS kit be purchased??
04-16-2017, 10:37 PM
#445
04-17-2017, 05:07 AM
#446
Droop over ride height method is what I use. Ran the BD8 on asphalt last weekend and I'm liking the car on asphalt with RTC. Never had real luck with the BD8 until I used the carbon spur brace, pitch control and rear toe control. New upper deck that comes with pcs system works for blinky also.
We have been testing some strange but great rear setups that the team drivers gave us, ill post up after next weekend but working well so far.
PCS and carbon spur brace have stopped and spur issues .
04-18-2017, 04:46 PM
#448
I will be posting a New Sealed Carbon BD8 kit for sale in the next day or two. I also have just about every hop up for it. Items will be cheaper that can be bought new anywhere. PM me if you are interested in the kit or parts pricing. I will post a link when posted.
Last edited by ATOMIC; 04-18-2017 at 05:14 PM.
04-23-2017, 10:16 PM
#450
ok attached is the crazy RTC setup that is worth trying, it generates lots of rear grip.
The other option until we get the narrow rear RTC arms is to run the old BD7 steering knuckle in the RTC with 3out blocks as its 1mm narrower then the BD8 steering knuckles, which is basically what Ronald used at the worlds.
It was my second race in Mod, so was still 0.5s a lap off the best drivers in the country, Simon was on pace so no surprises there
The other option until we get the narrow rear RTC arms is to run the old BD7 steering knuckle in the RTC with 3out blocks as its 1mm narrower then the BD8 steering knuckles, which is basically what Ronald used at the worlds.
It was my second race in Mod, so was still 0.5s a lap off the best drivers in the country, Simon was on pace so no surprises there