Serpent 747-e
#137
Tech Rookie
all right!! thank you very much
someone have a video of 747e on 3s lipo or more ?
we find it often on 2s lipo ,rarely more
thanks
#138
Tech Rookie
Hello to you
someone can give me the total weight of the 747e in 3s 235mm configuration with the body?
thank you
someone can give me the total weight of the 747e in 3s 235mm configuration with the body?
thank you
#139
A few of us in North Jersey have this kit. We got the green like from one of our local outdoor tracks to run these as part of the program. Can't wait!
#141
#142
Tech Fanatic
iTrader: (2)
We run mod as well. We're going to be running them at Jackson Raceway.
#143
Tech Rookie
@Evo 13
Hi Evo , Can I ask which exceed wheels you are using front and back ? Model number would be great, as Im afraid I'll order something that wont fit are they still 12mm hex?
(I would like to try wider wheels on and old nitro rs4)
I assume your porshe body is still 200mm.. if not which body is it?
Thanks for any guidence
Hi Evo , Can I ask which exceed wheels you are using front and back ? Model number would be great, as Im afraid I'll order something that wont fit are they still 12mm hex?
(I would like to try wider wheels on and old nitro rs4)
I assume your porshe body is still 200mm.. if not which body is it?
Thanks for any guidence
#144
Tech Fanatic
iTrader: (2)
@Evo 13
Hi Evo , Can I ask which exceed wheels you are using front and back ? Model number would be great, as Im afraid I'll order something that wont fit are they still 12mm hex?
(I would like to try wider wheels on and old nitro rs4)
I assume your porshe body is still 200mm.. if not which body is it?
Thanks for any guidence
Hi Evo , Can I ask which exceed wheels you are using front and back ? Model number would be great, as Im afraid I'll order something that wont fit are they still 12mm hex?
(I would like to try wider wheels on and old nitro rs4)
I assume your porshe body is still 200mm.. if not which body is it?
Thanks for any guidence
Front: xceed [XCE-101561] 31.5mm wide
Rear: xceed XCE-101564] 44.5 mm wide
Yes they are 12mm hex, they will fit with no problem. Your problem (747e) will be tucking them under the shell. I had to do some mod work to the suspension system including using different dogbones. But I got it to my liking.
These tires are bad-**s. They allow me to push the car sooo much harder.
Yes the porsche and the BMW are 200mm. I keep saying for a 1/10 touring car, this 747e is immensely underrated!
#145
Did anyone notice that Serpent published a 748-e default setup sheet on their website?
#146
Tech Rookie
Glad to be of some help.
Front: xceed [XCE-101561] 31.5mm wide
Rear: xceed XCE-101564] 44.5 mm wide
Yes they are 12mm hex, they will fit with no problem. Your problem (747e) will be tucking them under the shell. I had to do some mod work to the suspension system including using different dogbones. But I got it to my liking.
These tires are bad-**s. They allow me to push the car sooo much harder.
Yes the porsche and the BMW are 200mm. I keep saying for a 1/10 touring car, this 747e is immensely underrated!
Front: xceed [XCE-101561] 31.5mm wide
Rear: xceed XCE-101564] 44.5 mm wide
Yes they are 12mm hex, they will fit with no problem. Your problem (747e) will be tucking them under the shell. I had to do some mod work to the suspension system including using different dogbones. But I got it to my liking.
These tires are bad-**s. They allow me to push the car sooo much harder.
Yes the porsche and the BMW are 200mm. I keep saying for a 1/10 touring car, this 747e is immensely underrated!
I think you messed up the model number though. Well I hope you did ! cause I ordered 2 sets of
#101557 black carbon 37 shore rears (44.5mm wide)
#101553 black carbon 37 shore fronts (31.3mm wide)
I hope these wheels will fit my old nitro HPI RS4 ! (or I can make them) They look killer! I assume they fit like the standard 26mm and 30mm wheels, but stick out farther.. If so, I'll be extremely happy. (I can set the rs4 to 190mm width to help fit the bodies.)
It might delay me buying a 747e
The serpent 747e looks beautifully engineered! :P Definately my next rc
Last edited by jlm0924; 04-23-2015 at 09:23 AM.
#148
Tech Fanatic
iTrader: (2)
Thanks Evo, I believe I found them at rc-mushroom,rcmarket, and on xceed website..
I think you messed up the model number though. Well I hope you did ! cause I ordered 2 sets of
#101557 black carbon 37 shore rears (44.5mm wide)
#101553 black carbon 37 shore fronts (31.3mm wide)
I hope these wheels will fit my old nitro HPI RS4 ! (or I can make them) They look killer! I assume they fit like the standard 26mm and 30mm wheels, but stick out farther.. If so, I'll be extremely happy. (I can set the rs4 to 190mm width to help fit the bodies.)
It might delay me buying a 747e
The serpent 747e looks beautifully engineered! :P Definately my next rc
I think you messed up the model number though. Well I hope you did ! cause I ordered 2 sets of
#101557 black carbon 37 shore rears (44.5mm wide)
#101553 black carbon 37 shore fronts (31.3mm wide)
I hope these wheels will fit my old nitro HPI RS4 ! (or I can make them) They look killer! I assume they fit like the standard 26mm and 30mm wheels, but stick out farther.. If so, I'll be extremely happy. (I can set the rs4 to 190mm width to help fit the bodies.)
It might delay me buying a 747e
The serpent 747e looks beautifully engineered! :P Definately my next rc
#149
Evo 13,
We have 3 Sedan-E's going to Jackson this Saturday for their opener. Hope to see you there.
We have 3 Sedan-E's going to Jackson this Saturday for their opener. Hope to see you there.
#150
Tech Fanatic
iTrader: (2)
Fortunately this is my last semester of college and thus, I should have ample time to hot rod on weekends going forward!