Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#558
How's the traction compared to a rb5?
#562
Anybody know if Tebo was running a pair of aluminium RF2/RR2 (wide) hinge pin holders? Can't make it out from the pictures. Would it be necessary with the alum chassis I wonder? I can make out the finned SP motor plate and alum 0 deg hubs. Thanks,
#564
#566
Tech Master
iTrader: (16)
I talked to Jared about the rb6 this weekend at the Missouri state finals. He ran the clamping front hexes and axles with the caster inserts set to a shorter width, but still ran the RB6 suspension mount. He did not run aluminum hinge pin mounts, the new ones are stronger and so are the rear hubs. He also ran .5* hubs at WCRC nationals because the track was a little loose. He also ran the original RB5 flat 521-1 arms with one hole. He said he does not like the feel of the gull wing arms.
#567
I talked to Jared about the rb6 this weekend at the Missouri state finals. He ran the clamping front hexes and axles with the caster inserts set to a shorter width, but still ran the RB6 suspension mount. He did not run aluminum hinge pin mounts, the new ones are stronger and so are the rear hubs. He also ran .5* hubs at WCRC nationals because the track was a little loose. He also ran the original RB5 flat 521-1 arms with one hole. He said he does not like the feel of the gull wing arms.
I am wondering if the RB6 hinge pin mounts are those that came with the RB5 carbon comp T-plate pack, therefore being carbon composite? Reading through the manual and sorting thru the pieces. The shock o-rings are the normal orange type, not x o-rings. The hinge pin bushings are metal, will need LAW32 SP bushings if I run alum hinge pin holders. The alum chassis plate is amazing though wow. The lexan wing has 3 cut-out lines for your lip/drag, which is nice little improvement over the RB5/ZX5 wing pack.
#568
Tech Elite
iTrader: (14)
I talked to Jared about the rb6 this weekend at the Missouri state finals. He ran the clamping front hexes and axles with the caster inserts set to a shorter width, but still ran the RB6 suspension mount. He did not run aluminum hinge pin mounts, the new ones are stronger and so are the rear hubs. He also ran .5* hubs at WCRC nationals because the track was a little loose. He also ran the original RB5 flat 521-1 arms with one hole. He said he does not like the feel of the gull wing arms.
#569
Tech Apprentice
Hello..
If anyone is interested...
JE Models (Formerley JE Spares.. they have moved to a bigger premises etc)
Have 10+ of the RB6 kits in and a good assortment of spares.
email me... [email protected]
If anyone is interested...
JE Models (Formerley JE Spares.. they have moved to a bigger premises etc)
Have 10+ of the RB6 kits in and a good assortment of spares.
email me... [email protected]
#570
Tech Regular
Hello..
If anyone is interested...
JE Models (Formerley JE Spares.. they have moved to a bigger premises etc)
Have 10+ of the RB6 kits in and a good assortment of spares.
email me... [email protected]
If anyone is interested...
JE Models (Formerley JE Spares.. they have moved to a bigger premises etc)
Have 10+ of the RB6 kits in and a good assortment of spares.
email me... [email protected]
£20 more than the Xray XB9 on your site?
I sure hope this price will fall a bit.