help with motor
#1
Tech Apprentice
Thread Starter
help with motor
well I just started racing again and I got a cen pro buggy and got a 4 stroke
O.S. 30 and need help with the gearing right now it is a 15t clutch bell and the car doesnt start moving till about half throttle could this be clutch setup or gearing?
O.S. 30 and need help with the gearing right now it is a 15t clutch bell and the car doesnt start moving till about half throttle could this be clutch setup or gearing?
#2
Sounds like ur clutch is way stiff.
#5
#9
Tech Apprentice
Thread Starter
it is a 4 stroke and nothing is binding up but I am preety sure it is a clutch spring problem, the springs are 1.1's I believe, and I noticed there is a large amount of air gap between the shoes and the bell what is the gap supposed to be set at?
#10
Tech Master
iTrader: (58)
Does it look like this? this is a OS 30 4 stroke!
http://www3.towerhobbies.com/cgi-bin...I=LXCNA5&P=FR#
http://www3.towerhobbies.com/cgi-bin...I=LXCNA5&P=FR#
#11
Not a lot of RPM to work with if it's the motor above...
#12
Tech Regular
iTrader: (2)
You really may need to do some custom clutch design to get the engagement to a reasonable rpm for that engine. Gearing is also a problem. If you had it in a truggy I would say to put buggy gears in both differentials. Not many options in a buggy though. Good luck.