Team Associated TC5
#8852
Tech Regular
Snowbird Setup
Here is the latest setup I have been running for 13.5 or 10.5 ! It is the one I used at Snowbirds !
Front :
ride height : 4.2
camber :1.5
caster :6
Toe : 1 out
hex spacing .5mm
wheelbase : 1mm
steering link : 2B
Bumpsteer : 3mm (silver ballstud )
Shock position : 2A
Camber link : 3
Arm mounts Both 3A
2.5mm for arm mount shim
1.5mm uptravel
black rollbar
60 weight oil
#3 piston
xray 28lbs spring
Thick Grease in front diff
A3 belt tension (midlow)
REAR :
ride height : 4.2
camber :2.5
1 deg Hub
Toe : ~2.75 deg
hex spacing .75mm
wheelbase : 2mm
Shock position : 2B
Camber link : 3A
Arm mounts Both 2A
1mm for arm mount shim front
2.5mm for arm mount shim rear
1.5mm uptravel
black rollbar
30 weight oil
#57 piston
xray 17lbs spring (white)
B15 for belt tention (lowest)
Parma Magenta Tires (new compound)
56.4mm
protoform r9 body
hope you guys like it !!!
Front :
ride height : 4.2
camber :1.5
caster :6
Toe : 1 out
hex spacing .5mm
wheelbase : 1mm
steering link : 2B
Bumpsteer : 3mm (silver ballstud )
Shock position : 2A
Camber link : 3
Arm mounts Both 3A
2.5mm for arm mount shim
1.5mm uptravel
black rollbar
60 weight oil
#3 piston
xray 28lbs spring
Thick Grease in front diff
A3 belt tension (midlow)
REAR :
ride height : 4.2
camber :2.5
1 deg Hub
Toe : ~2.75 deg
hex spacing .75mm
wheelbase : 2mm
Shock position : 2B
Camber link : 3A
Arm mounts Both 2A
1mm for arm mount shim front
2.5mm for arm mount shim rear
1.5mm uptravel
black rollbar
30 weight oil
#57 piston
xray 17lbs spring (white)
B15 for belt tention (lowest)
Parma Magenta Tires (new compound)
56.4mm
protoform r9 body
hope you guys like it !!!
#8853
Thanks Keven for this setup!
I don't have nothing but AE parts avail. at the monment... What would be closest AE pistion to Losi #57?
I don't have nothing but AE parts avail. at the monment... What would be closest AE pistion to Losi #57?
#8854
#3
#8855
#8856
For 13.5 with a lipo, running no asphalt what would be a good pinion/spur to start with?
http://www.youtube.com/watch?v=61wL2Eq3qUk the layout is diferent now but you can atleast get an idea of how big the track is.
Thanks
Cody
http://www.youtube.com/watch?v=61wL2Eq3qUk the layout is diferent now but you can atleast get an idea of how big the track is.
Thanks
Cody
#8857
Tech Master
iTrader: (5)
For 13.5 with a lipo, running no asphalt what would be a good pinion/spur to start with?
http://www.youtube.com/watch?v=61wL2Eq3qUk the layout is diferent now but you can atleast get an idea of how big the track is.
Thanks
Cody
http://www.youtube.com/watch?v=61wL2Eq3qUk the layout is diferent now but you can atleast get an idea of how big the track is.
Thanks
Cody
#8858
What exactly would that roll out equal in pinion/spur size? That confuses me alot. lol
Cody
Cody
#8859
Tech Fanatic
iTrader: (2)
The new setup seems to have a better balance. The front and rear of the car roll over at the same time when your in a turn. With the old setup it seemed like the rear of the car would stay flat and the front would try to roll alot.
I have tried this setup at 3 tracks. Big, little, open, tight, high bite, low bite, oneway, spool. It seems to work well in all carpet conditions.
xtreme.......i'm not sure a spool is the way to go on a tight technical track.....unless braking is needed.
I have tried this setup at 3 tracks. Big, little, open, tight, high bite, low bite, oneway, spool. It seems to work well in all carpet conditions.
xtreme.......i'm not sure a spool is the way to go on a tight technical track.....unless braking is needed.
#8861
Im running rubber!
#8862
Well tell me if this sounds about right. 108/48 would equal my 4.50
Thanks
Thanks
#8865
Here is the latest setup I have been running for 13.5 or 10.5 ! It is the one I used at Snowbirds !
Front :
ride height : 4.2
camber :1.5
caster :6
Toe : 1 out
hex spacing .5mm
wheelbase : 1mm
steering link : 2B
Bumpsteer : 3mm (silver ballstud )
Shock position : 2A
Camber link : 3
Arm mounts Both 3A
2.5mm for arm mount shim
1.5mm uptravel
black rollbar
60 weight oil
#3 piston
xray 28lbs spring
Thick Grease in front diff
A3 belt tension (midlow)
REAR :
ride height : 4.2
camber :2.5
1 deg Hub
Toe : ~2.75 deg
hex spacing .75mm
wheelbase : 2mm
Shock position : 2B
Camber link : 3A
Arm mounts Both 2A
1mm for arm mount shim front
2.5mm for arm mount shim rear
1.5mm uptravel
black rollbar
30 weight oil
#57 piston
xray 17lbs spring (white)
B15 for belt tention (lowest)
Parma Magenta Tires (new compound)
56.4mm
protoform r9 body
hope you guys like it !!!
Front :
ride height : 4.2
camber :1.5
caster :6
Toe : 1 out
hex spacing .5mm
wheelbase : 1mm
steering link : 2B
Bumpsteer : 3mm (silver ballstud )
Shock position : 2A
Camber link : 3
Arm mounts Both 3A
2.5mm for arm mount shim
1.5mm uptravel
black rollbar
60 weight oil
#3 piston
xray 28lbs spring
Thick Grease in front diff
A3 belt tension (midlow)
REAR :
ride height : 4.2
camber :2.5
1 deg Hub
Toe : ~2.75 deg
hex spacing .75mm
wheelbase : 2mm
Shock position : 2B
Camber link : 3A
Arm mounts Both 2A
1mm for arm mount shim front
2.5mm for arm mount shim rear
1.5mm uptravel
black rollbar
30 weight oil
#57 piston
xray 17lbs spring (white)
B15 for belt tention (lowest)
Parma Magenta Tires (new compound)
56.4mm
protoform r9 body
hope you guys like it !!!