Cen Matrix TR FRE, King heads, machine's Parts. 4 sale
04-07-2008, 06:18 PM
#1
Cen Matrix TR FRE, King heads, machine's Parts. 4 sale
Here I have a Cen matrix Truggy I bought this new last spring.. I would keep it as I have liked the truck! But I am going back to buggy as My fiancee is running buggy this year and I miss having a practice buddy to race and goof around with during practice..
There is around 4 gallons of use on the car and was always cleaned within a day or two of racing.. it was kept well.. there are some rusty screws as the pics will show.. but I got caught in a rainy main and this was the end result!! The truck is nice and has very little slop.. slight slop in the steering plate but not too rough..
1 gl on fresh avid bearings throughout.. cleaned and blown.. then a few drops of Tri flow and reblown @ 20 psi..
King heads engine mount ..
KH spare blocks.
Cen 22* front hub carriers
Cen Upper steering arm
Genes Cross pins.. Center and Rear.. front is LSD but have the kit to convert.. ( maybe missing a few shims but all important parts are there) Gene is available on this very forum and could help get you goin if you wanted the front lsd out...
Genes Upper front arm . 7075 warranted to be unbreakable.
NIB parts..
one set of upper front arms..
one set of lowers
One set of lower rear arms
one set of Rear hubs..
One set of Rear shock shafts
New set of proline 1/2 off Rims
Odd build and tune parts..
stock rear sqat and toe plate.
2t 2s plate installed
2t 3s plate
front shock shafts new but opened.. various other parts.. stock mounts..
Ufortunately I have no clutch for this.. as flywheel got marred and bought a M2c 4 shoe that I will not be giving up.. I will include the 14 th bell the truck came with... This is a very nice setup.. and was well maintained..
asking 275$.. plus shipping reasonable lowballing is acceptable.. : )
Just so we are clear the Sirio in pics was only to show the spare KH mounts and the flexability this system allows.. and is not included..
There is around 4 gallons of use on the car and was always cleaned within a day or two of racing.. it was kept well.. there are some rusty screws as the pics will show.. but I got caught in a rainy main and this was the end result!! The truck is nice and has very little slop.. slight slop in the steering plate but not too rough..
1 gl on fresh avid bearings throughout.. cleaned and blown.. then a few drops of Tri flow and reblown @ 20 psi..
King heads engine mount ..
KH spare blocks.
Cen 22* front hub carriers
Cen Upper steering arm
Genes Cross pins.. Center and Rear.. front is LSD but have the kit to convert.. ( maybe missing a few shims but all important parts are there) Gene is available on this very forum and could help get you goin if you wanted the front lsd out...
Genes Upper front arm . 7075 warranted to be unbreakable.
NIB parts..
one set of upper front arms..
one set of lowers
One set of lower rear arms
one set of Rear hubs..
One set of Rear shock shafts
New set of proline 1/2 off Rims
Odd build and tune parts..
stock rear sqat and toe plate.
2t 2s plate installed
2t 3s plate
front shock shafts new but opened.. various other parts.. stock mounts..
Ufortunately I have no clutch for this.. as flywheel got marred and bought a M2c 4 shoe that I will not be giving up.. I will include the 14 th bell the truck came with... This is a very nice setup.. and was well maintained..
asking 275$.. plus shipping reasonable lowballing is acceptable.. : )
Just so we are clear the Sirio in pics was only to show the spare KH mounts and the flexability this system allows.. and is not included..
04-11-2008, 06:13 PM
#10
interested in a new modded v-spec?
pm me
pm me
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
