Tamiya TB-Evolution III
#2026
YES IT IS!
Salutations Earthlings!
i used the included "high torque" servo and it sucks.
there is a lot of play between the plastiky bit and the metal spring.
i tried to solve it bu using one less spring ,that got rid of the play but that made ther servo saver really soft.
then i tried to add a bit of epoxy to rid the gap<causing the play>but it just got too messy.
i eventually used a kimbrough servo saver.
you try it...
-FP
i used the included "high torque" servo and it sucks.
there is a lot of play between the plastiky bit and the metal spring.
i tried to solve it bu using one less spring ,that got rid of the play but that made ther servo saver really soft.
then i tried to add a bit of epoxy to rid the gap<causing the play>but it just got too messy.
i eventually used a kimbrough servo saver.
you try it...
-FP
#2027
i got the black servo saver...MUCH MUCH MUCH better . looks cool too cuz most of my stuff is dark colored
#2030
Originally posted by peter_robinson
my black servo saver had the same slop as the white one. i personally like the good one from HPI, can't remember the part number though, thats if you run a saver.
i am currently running just a solid aluminum servo arm. no slop in those
peter
my black servo saver had the same slop as the white one. i personally like the good one from HPI, can't remember the part number though, thats if you run a saver.
i am currently running just a solid aluminum servo arm. no slop in those
peter
#2031
Originally posted by izzyracer
FYI on Shurikarn Edition:
There was a display at the RCX show here in California.
No aluminum support blocks in the middle and gear case are still made of regular plastic not hardened composite.
FYI on Shurikarn Edition:
There was a display at the RCX show here in California.
No aluminum support blocks in the middle and gear case are still made of regular plastic not hardened composite.
#2032
Tech Elite
iTrader: (12)
Attention all TCS racers that are coming to Memphis-
Our AMB r/c and Jlap software is working well. If you have personal transponders please bring them. We are proud to announce this new system and software!!!
Please spread the word about the TCS race. We would LOVE to have all of you!!!
Our AMB r/c and Jlap software is working well. If you have personal transponders please bring them. We are proud to announce this new system and software!!!
Please spread the word about the TCS race. We would LOVE to have all of you!!!
#2034
Tech Adept
servo saver
The one from Kawada is very good!
#2035
but me joining a tamiya race so can't use anything other than tamiya....damn tires and stuff so expensive! i got a set of HPI tires with inserts and dish wheels and 35r tires for 150$ HKD....with that i only can buy the 2 packs of A slicks! no inserts, no rims!
#2036
Re: servo saver
Originally posted by mr4-tc sp
The one from Kawada is very good!
The one from Kawada is very good!
Tony
#2037
Tech Elite
iTrader: (27)
RCX
Originally posted by peter_robinson
izzyracer- how was RCX by the way??
i had a friend who went but have not heard from him yet...
peter
izzyracer- how was RCX by the way??
i had a friend who went but have not heard from him yet...
peter
It was pack Saturday and Sunday and was very successful.
#2040
Tech Regular
Originally posted by BigDogRacing
Attention all TCS racers that are coming to Memphis-
Our AMB r/c and Jlap software is working well. If you have personal transponders please bring them. We are proud to announce this new system and software!!!
Please spread the word about the TCS race. We would LOVE to have all of you!!!
Attention all TCS racers that are coming to Memphis-
Our AMB r/c and Jlap software is working well. If you have personal transponders please bring them. We are proud to announce this new system and software!!!
Please spread the word about the TCS race. We would LOVE to have all of you!!!
It has a number of features and is very easy to use windows based programe writen by an r/c racer.