raved007

iTrader: (36)

They are sold out

Norse

iTrader: (43)

If anyone whom needs one or more just send Thomas an email as he can turn them out quick. The last 10 he turned out within 48 hours of requesting, thus again just shoot him an email and he will email you back with a turn around time,

blwaz23

Wow never thought of that. Thank you

John Myall

Your welcome fella

I think I've got the mid height ones on my car, can't be too sure, they've been there since 2013 There were 3 different height cups in the packet.

grifind

Spec Rs are only available through order to get them in greece and it would take about 2-3 weeks to get them on my hands...
I did change them with huddy which i found pretty cheap as stock on a hobby shop here, and serviced my shocks and differentials with new oil. i run 5000 front and 1000 back and 350 back susp, 450 front susp. It runs pretty smooth on our track here which is carpet placed on dirt actually. now i am just waiting for new schummacher mini pins and lets go for a few fast laps :P

Norse

iTrader: (43)

Sounds like you got her dialed in. Sweet!! XRAY makes great stuff you will be happy with your XB4.

freakshow__

Does anyone know if there are any other bodies to fit the 2016 XB-4 yet? The stock XRAY wide V2 bodies seem to be kinda scarce right now....not to mention expensive.

RichD

iTrader: (13)

Does anyone know the theoretical lb/in rating of the 1 dot front springs?

Norse

iTrader: (43)

I do not know if there are any aftermarket bodies for the 16, however for V2 bodies you may want to check. I think Amain is out of stock, try the below US based XRAY dealers.

Absolute Hobbyz // scratch that off as they are out of stock
Discount RC Store // sorry bro scratch them off as well as their out of stock.
GSHobby

Try eBay as well

Oh! If you have No luck with those give RC America a call.

Norse

iTrader: (43)

Hey my friend for a 16XB4 body check out Penguin RC bodies. They have a V2 for the 16 XB4 that will cost you $17 US dollars plus another $7 to ship.

Norse

iTrader: (43)

Hey my friend check out Penguin RC bodies as they have a body for the 16XB4.

17 US dollars plus an additional. Sorry shipping is close to 7 pounds thus Int. Shipping will cost you an additional $10

BentKa

5K / 500K / 3K

1.2mm sway bars front and rear

1 dot springs front and rear

Bent

LAGuy

iTrader: (5)

Hi Bent, finished putting my XB2 together. Beautiful kit!

What roll center holes were you using on Malins Buggy?

Could you please post a pic of the homemade chassis stiffener that attaches to the battery brace? Thanks!

Vincent_Diesel

iTrader: (2)

Bit of an odd experience but my right rear wheel nut seems to loosen after a 5 minute run. I run on indoor astro, XB4 pretty much stock and have not experienced this before.

Anybody else run into this?

suzukipro

iTrader: (33)

If you are not using locknuts put some blue Loctite on the threads to help reduce the potential for a wheel to come off during a run. the right side front and rear are more prone to loosening due to the thread and wheel rotations.