Yokomo R12
#541
Tech Elite
iTrader: (49)
Is there an English version of the manual for these cars anywhere? I'm working on an R12C3, but the manual is in Japanese and I need to order replacement front sway bar mounts. I already ordered the part I thought was the replacement according to the manual, but the slot for the swaybar to rest in is too big. Can anyone give me some insight into this? I cant seem to find any other part numbers that would be correct, much less where to order them to arrive in the states.
#543
Is this faster than the BD7 touring car around a same track?
#544
Tech Elite
iTrader: (49)
http://www.amain.com/product_info.ph...FewRMwodEBQA_Q
Does anyone have any ideas on getting the right part?
#545
Tech Elite
iTrader: (8)
TQ'd and won the first stage of the 1/12 All Japan Nationals. It was my first outing with the a Yokomo R12C3 and what a beast. Managed to post the fastest lap of the day and was the first time ever to record a 10.645 lap. The fastest ever recorded lap time on this track was a 10.510 by a Yokomo factory driver. Not bad considering it was first time and had limited track testing.
#546
TQ'd and won the first stage of the 1/12 All Japan Nationals. It was my first outing with the a Yokomo R12C3 and what a beast. Managed to post the fastest lap of the day and was the first time ever to record a 10.645 lap. The fastest ever recorded lap time on this track was a 10.510 by a Yokomo factory driver. Not bad considering it was first time and had limited track testing.
Could you give us some tips about the way you setup the car, what body and tires you used?
Thanks
#547
#550
Tech Fanatic
iTrader: (20)
Think I am going to give the R12C3 a try this year. Really like my X12'14, and it has performed well for me, but I like different.
Few questions, does this car use standard size bearings? Or are they metric?
Also, in regards to tires, one of the reasons I want to try this car is the rear hub set-up. Seems to me that the hub off set would work well. However, I have found that I really like certain compound tires, specifically, purple or black for the front, and green or yellow in the rear. How do the Yokomo/CRT pre-mounted compare to the above, what would be the equivalent?
Cheers
Few questions, does this car use standard size bearings? Or are they metric?
Also, in regards to tires, one of the reasons I want to try this car is the rear hub set-up. Seems to me that the hub off set would work well. However, I have found that I really like certain compound tires, specifically, purple or black for the front, and green or yellow in the rear. How do the Yokomo/CRT pre-mounted compare to the above, what would be the equivalent?
Cheers
#551
Tech Elite
iTrader: (8)
Think I am going to give the R12C3 a try this year. Really like my X12'14, and it has performed well for me, but I like different.
Few questions, does this car use standard size bearings? Or are they metric?
Also, in regards to tires, one of the reasons I want to try this car is the rear hub set-up. Seems to me that the hub off set would work well. However, I have found that I really like certain compound tires, specifically, purple or black for the front, and green or yellow in the rear. How do the Yokomo/CRT pre-mounted compare to the above, what would be the equivalent?
Cheers
Few questions, does this car use standard size bearings? Or are they metric?
Also, in regards to tires, one of the reasons I want to try this car is the rear hub set-up. Seems to me that the hub off set would work well. However, I have found that I really like certain compound tires, specifically, purple or black for the front, and green or yellow in the rear. How do the Yokomo/CRT pre-mounted compare to the above, what would be the equivalent?
Cheers
I just bought 140 USD worth of Yokomo CRT Premounts. I'm running CRT medium (magenta) front and rear. .
They work like a charm for stock racing. Just sauce them achieve the handling you desire.
#552
Tech Fanatic
iTrader: (20)
Also, is there any other shops in NA that sell parts/tires for this car besides Amain?
#553
If you want the standard compounds with an offset, look at PRO One RC, they have a facebook page.
#554
Tech Apprentice
Hello
Where can i purchase this TEAMBOMBER products?
Body and conversion kit looks very interesting for me.
But I'm a little bit confused about the part numbers of
the conversion kit. On the HP there are 4 part numbers...
2 for the conversion with the blue and 2 numbers for the
conversion with the black tubes. i own a C3, so which
is the correct part number for the blue ones?
Regards,
Gero
Where can i purchase this TEAMBOMBER products?
Body and conversion kit looks very interesting for me.
But I'm a little bit confused about the part numbers of
the conversion kit. On the HP there are 4 part numbers...
2 for the conversion with the blue and 2 numbers for the
conversion with the black tubes. i own a C3, so which
is the correct part number for the blue ones?
Regards,
Gero