elee32

iTrader: (18)

There is not a lot of space in between the steering rack and the end of the ffg so a tunbuckle may not clear through the whole steering throw

Oleg Babich

FCB (Flexible Caster Block) sets are available now.

Features:

1. Adjustable caster flex level.

2. Simple camber adjusting without turning of the top turnbuckles.

3. Fixed caster mode is available.

4. Simple caster adjusting (in the fixed caster mode only) without turning of the top turnbuckles.

5. Camber flex configuration is possible with optional inner o-rings.


http://shop.awesomatix.com/index.php?productID=1019

29TC

iTrader: (2)

Is the FCB specific to the front arms or can be used front/back?

josecarlo1129

iTrader: (1)

^I think it can be installed to both but let's hear Oleg's suggestion based on the team's testings.

Another innovation from AWESOMATIX. The car will surely be more responsive with this.

hanulec

iTrader: (28)

Both -

But I'd like to hear from Oleg if, when installed in the back, is Adjustable Caster Flex used, or only the Fixed Caster Mode?

hana166

iTrader: (2)

Been out the game for some time.

I'd like to convert the inner upper balls from AT21 to ST24 and use P13-4. Should be neater and easier to make shim changes. Is the height the same?

Does anybody know the difference between ST24 included with FFG and ST24-2

Oleg Babich

ST24 and ST24L balls are 0,7mm lower compared to AT21.

JayL

So how do you copy a setup that uses AT21? I only see 1.75mm shims, so it would be off by .05mm?

Oleg Babich

+/-0.05 mm is not so important as this is within the productional tolerance for combination of ball stud + any shim height.

Magnet Top

iTrader: (4)

.

hana166

iTrader: (2)

Thank you Oleg for your answer

G-rem

iTrader: (2)

Oleg, can you please tell us how different are the new parts for the FFG set (AM42-1, AM46-1 and AM54-1) in comparison with the original ones (AM42, AM46 and AM54)?

Apart from these parts, is there any other updates for the FFG1.1 set in comparison with the first FFG?

What is the AM30-5 stiffner? How different is it from AM30-1?

How different are ST24-2 in comparison with ST24?

Thanks a lot for your support,
Best regards,
G-rem

hanulec

iTrader: (28)

FFG1.1 is a minor revision of parts (AM42-1, AM46-1 and AM54-1), and includes the bearing mod discussed on many prior pages.

AM30-5 is stiffer (6mm thickness) and has the additional holes for more precise flex adjusting for the future. AM30-5 is suitable for current alloy chassis also.

ST24-2 is a quantity=2 packaging instead of the ST24 quantity=4

G-rem

iTrader: (2)

Fantastic Mike, thank you very much!!

Can we have pictures comparison of AM42 vs AM42-1, AM46 vs AM46-1 and AM54 vs AM54-1, please? Also, do you have any manual for this updated FFG kit(to see the bearing mod,...)?

Best regards,
G-rem

bertrandsv87

iTrader: (2)

P e r f e c t O l e g..... N i c e !!!!