kenny lutz

iTrader: (38)

i have only boke one part which was totally my fault and it took some really bad crashes to break it. I was running on a 1/8th lay with a big triple that i came up short on a couple of times and it flipped it on the rear wing/shock tower and ended you breaking the rear diff case. i blame my self because it was only a matter of time before something broke hitting jumps that big but it was fun and i had the parts to fix it so it wasnt an issue at all.

kenny lutz

iTrader: (38)

when you run the durango wheels does it change the off set or anything like that. i want to do black wheels on mine and they have them for the durango.

ryanpatrickgore

iTrader: (14)

You can just get white wheels and dye them black with rit dye from the craft store

kenny lutz

iTrader: (38)

will it hold up good or will it wear off over time?

Arigato

iTrader: (1)

Dying them last a long time if you do it right. The big brown truck just came by and gave me my new toy! The driver was a little freaked out when I asked her for a hug....

07Forester

iTrader: (10)

Offset is the same for the durango wheels.

B00t13g

iTrader: (9)

Started building my xb4 tonight. Everything is fantastic quality and fits perfect as every other x ray/ hudy product I've owned. Can't wait to get electronics on it! Bls551 or s9351?

Arigato

iTrader: (1)

Offset is the same for the durango wheels.

Good info right there!

07Forester

iTrader: (10)

I used a savox 1258 in mine and it does wonders!

07Forester

iTrader: (10)

just here to help.

BTW, if you want more rear stability (especially if you're coming from a 44.2) use the .5 shims facing to the OUTSIDE MIDDLE of the car on the front and rear of the gearbox.

MX943

iTrader: (41)

Do U have picture on that ?

07Forester

iTrader: (10)

just a moment......

07Forester

iTrader: (10)

This is what is should look like front and rear...

asc6000

iTrader: (15)

Are you changing both front and rear eccentric bushings of each end of the car ? > (adding track width)
or are you changing the rear eccentric bushings only ? (adding toe)
FF and FR is the front.... RF and RR is the rear.... so all four need to be accounted for.

mlinder

iTrader: (3)

Asc,

I think he is saying to increase the rear end track width only, using the .5 bushings in the front and rear locations on the rear gearbox only.

Mark