Originally Posted by
DiscountRCStore
This is what I ran in the mains, was the softest of all the setups .. Hope it helps ..
..p
I've been running mid motor with 3 dink plates front and rear yok pinks and blue springs same washers under the ball studs as your using 0 notch rear hub plate .5 washers under rear arms and .5 under just the rear of the front arms I'm running .5 antidive with the stock 4 deg yok shocks laid all way down front rear with ae 37.5 oil front and rear 2.5 rear toe 2000 cst diff oil deg 2 camber front and rear thats on jaco blue tires and sxt tire prep sauce the both tires full 5 m ride height mazda speed6 body I'll post a setup sheet for eveyone to see in better detail in a little while