Originally Posted by
SeanV
Ok, just tried it on an Windows XP machine.
I get exactly the same error. I tried going down to V2 versions - no.
I tried to goi down to V3.0 119 - no go.
I even tried to put the latest no timing software and no go.
Every time I get exactly the same error.
Happened to me when I had
usb link version on computer (XP): V1.63_110119
2 in 1 program card version: v1.07_110119
was using 119 and then decided to go back to 1224 and ...
installed usb link version on computer (XP): V1.63_110105
flashed 2 in 1 program card version: v1.07_101224
and could not download the 1224 onto the esc.
After a few tries, I had to go back to install 518 on the esc using the latest software on your program card that you have been using currently ... I hope the 930 has the 518 in the drop down list???
then ...
install usb link version on computer (XP): V1.62_100917
flash 2 in 1 program card version: v1.06_100512
then, 'upgrade' from there to
usb link version on computer (XP): V1.63_110105
and re-flash again 2 in 1 program card version to: v1.07_101224
and only then could I install 1224 onto the esc. Hope I made some sense ...
