ESC cut-off question
Hello guys,
I recently bought the Robitronic Speedstar Brushless Speedo 8.5t ESC and I have a big question regarding the cut off setup for battery. The manual says it can be programed from 3.0V to 6.0V. Since I am running a 2 cell LiPo battery pack, 7.4V, I want the cutoff to be at 3.5V per cell (7V total) . I dont have the option to set it up to 7V, only to 6V. Is the ESC parrametter setting (3V-6V) for both cells in pack, or only for one? Basicly if I set it up for 3V it considers only 1 cell, it will cutt off for one cell, or its 3V for both? Meaning it will go dangerously low at 1.5V for each cell.
Thanks