Originally Posted by
MC112b
Will a Jusstock esc run 1s with a booster?
Justock,xtreme stock and Xerun 120 amp 2.1v or 2.0 can all run as a 1s compatible esc .
You have 2 options
1.you use a booster directly connected to the receiver port from esc ( i recommend quality boosters like Novak none of the cheap ones that burn on plug in .
2 You use a rx pack plugged directly into the battery port of the receiver but you must cut the + positive wire red on the reciever rx port (you can put in a plug of some sort to connect it later when not using the esc in 1s and what to go back to using the bec or you can have a small rx plug as a harness in between the esc rx port and the receiver to eliminate the positive wire n that short section between esc and receiver so only in reality the signal wire and the negative which is not really being used will be connected only .
The switch on the esc must be switched to on for the esc to operate .
Also turn off the lipo cut off .