Josh
thanks for the info really appreciate it
Originally Posted by
Repulse
To setup CS on the Zero S, for the rear end I use the following parts:
SAK-08/pk -
Solid Axle
SAK-09 -
Solid Axle Outer Joint
SAK-07C -
Center Pulley 22t
Tamiya 53867 -
Ta05 36T 1-way pulley
Use these for a rear end ratio of 1.636.
On the Front end, I use the following setup:
SAK-65J -
Front Pulley 39T/40T
Tamiya 51213 -
Ta05 16T Center Pulley
You can use either the 39T for a 2.438 front end ratio or 40T for a 2.5 front end ratio. With the 39T you will have a 49% CS, and with the 40T you will get a 52% CS ratio.
With this setup, I havent had to use a belt tensioner, or change anything else from stock. If you have any other questions, just let me know. The links I included were to RCmart, however you can get the parts wherever you wish, if you wish to get the parts that I used.
Thanks,
Josh