Originally Posted by
bertrandsv87
In the manual , the turnbuckles should be 1.125" each for standard toe , but it does not specify what degree standard toe is , although I think it is as close to zero as possible, having built a few fttc4's to spec . Anyway you can get it as close to zero as possible using a board with two straight lines.....
1.125 is the turnbuckle physical length not the total length with ball cups. The RTR manual says total length center cup to center cup should be 1.7", although the FT manual doesn't state a length just gives a SO box, what ever that means.
Yeah I guess I give the two lines method a try. It's just harder to do with tires on the car.