Originally Posted by
g12314
You are overgeared for the track size and have too much timing being applied too quickly. These will cause the excessive motor temperature reading you are getting.
I would suggest the following:
FDR range: 7.5 for starting point.
ESC Settings:
9 . 35
10 . 6
12 . 18
13 . 5000
14 . 0.1 sec
15 . 600
Jimmy
i'll try this set up and i'll post back the result.i'll keep the endbell for 20' for now coz i've felt the power before n kinda like it.......thanks a lot jimmy