My Current Setup
Here's the setup I'm at right now...
This is for a medium grip Asphalt track sprayed with Soda...I'd like just a LITTLE more rear traction without losing any steering...any suggestions?
Front:
Shock tower-3
Upper Hub Ball-1
Steering arm-1
Upper a-arm mount-1
Lower suspension arm-1
Hinge pin mount-2 deg
Oil-60wt
Spring-Blue
Piston-2 holes on Vari piston
Spacer-none
Length-66mm
Droop-2.5mm
Anti-Roll Bar-None
Castor-10 deg, one spacer in front and behind the upper a-arm mount
Toe in-.5 Deg Toe-Out
Ride Height-5.0mm
Camber-0 deg
Lower wishbones-stock, rear position
Driveshafts-Metal Universals
Rear:
Shock tower-1
Upper Hub Ball-1
Upper a-arm mount-1
Lower suspension arm-1
Hinge pin mount-2 deg
Oil-60wt
Spring-Blue
Piston-2 holes on Vari piston
Spacer-none
Length-66mm
Droop-2.5mm
Anti-Roll Bar-None
Anti-squat-none, blocks flat on chassis
Toe in-2.5 deg
Ride Height-5.0mm
Camber-1.5 deg
Lower wishbones-stock, mid position
Driveshafts-stock, plastic CVD type
Motor-Green Machine 3 (25/86)
Drive Pulley-15T
Body- Opel Vectra (I think!)
One Way-None
Front Tires-Sorex 32
Rear Tires-Sorex 32
Inserts-Sorex Medium A's
Tire Traction-Paragon Ground Effects
This setup REALLY came around from the original setup when I moved the upper Hinge Pin mounts to hold #1 from hole #2.
Ron
Last edited by AZ_Ron; 04-08-2002 at 04:52 PM.