Originally Posted by
Born2Run
No,no.I'm talking for the same software (211) but different saved profiles on the program box.For example if i have on my esc the settings for my 10.5 motor and i switch to my 8.5 motor,how i could load the already saved profile for the 8.5 from the program box to the esc?
The profiles are saved in the ESC...
But here is what you should do:
connect the ESC to the program box.
Plug the ESC into your drive battery.
switch on the ESC, the programbox will show the current firmware version it has.
Press the "ok" button, it will connect to the ESC, and show the ESC firmware version and jump into the last used profile.
No press the "r/p" button, you will see the current profle and with the "value" button you can select another profile. Finally with the "item" button you can get into the profile.