just picked up one RC10L2 from the forum, never run before.
i have lots of 3s2200mah lipo from flying, wanting to try it out on my L2.
on board the 10L2;
-Hobbywing 5.5T with 60a esc
-Gear ratio 108/20 5.4:1
-Tire 63mm
-lipo 3s2p 4400mah.
Will this set up smoke the esc or thermal cut the motor ???? Is it possible to run 3s on 5.5T?
any input is greatly appreaciated.
Cheers!!