R/C Tech Forums - View Single Post - BMI Racing "Copperhead 12" discussion and support
Old 07-25-2011, 12:22 PM
  #1904  
protc3
Tech Lord
iTrader: (13)
 
protc3's Avatar
 
Join Date: Jun 2003
Location: Spring Hill,Florida
Posts: 10,867
Trader Rating: 13 (100%+)
Default

Originally Posted by MCSEDanny
Hey Jason I still need a starting point.
Front:

1.5mm flex plates soft position
caster shims to the rear of arms
1 degree camber
#6 shurlube in damper tube
4.5mm ride height
1mm droop
Team purple(Lilac if Jaco) Tires cut to 1.650


Rear:
Gold center spring w/ 40 wt. oil
medium ballstud on Antenna/shock mount
#4 shurlube in damper tubes
1.2mm carbon fiber flex plates mounted long
4.5mm ride height
1.5mm pod droop
Pod level at ride height
Magenta rear tires cut to 1.680

If need be, glue the edge of wheel to stop chuncking of tires.
protc3 is offline