Originally Posted by
scoop
Finally got someone to put my extreme on his lap top and find out what software we were running. Turns out it was 518. After a couple of qualifiers we put the 211 on and it was much slower. Before we were running 18 degrees turbo timing but on the 211 we had to ramp that up to 35 to get anywhere near the same performance same went for the all the other settings. Even had to go up two teeth on the pinion. 518 may not be as smooth but im convinced its not as quick.
Has anyone else found this?
Can anyone tell me what the difference was between 518 and 528?
Indoors on Carpet 518 is hard to beat for 13.5T.
Settings as follows
Boost Max
Turbo Max
Delay 0.3
Start RPM 3000
Supercharger Punch -5 or -6
FDR 7.0 to 8.0
(Hobbywing 13.5)
Similar performance on 211
Boost 40
Turbo 24
Slope 24
Delay 0.0
SC Punch 400
Start RPM 2000 to 4000
FDR 7.0 to 8.0
211 is easier on the motor if you are heavy handed.
Gearing is the key here, as with both firmwares you have to let the motor rev higher to get all the boost in this means moving away from the established 'norms' and thinking revs revs revs as I keep labouring on here the HW 13.5's LIKE TO REV they are NOT a torquey motor they are a screamer !!!