as per the setup sheet I have the D3 on 2 notches,
I will drop it back one and try your setup,
Thanks,
Originally Posted by
Kevin K
First how much timing are you using in your D3?
With 1 notch off center I would make these changes.....Try taking #4 and go to level 9....take #9 and go to 45deg.....take #10 to 6deg/0.1s....take #12 to 15deg....take #14 to 0s. This should increase the bottom end along with top end.....and gear at 6.7 to 6.5 to start and check temps. Hope this helps some.