how to de tweek the chassis
hiya guys
i know it was mentioned previously, but i cant find the thread.
im suffereing from chassis tweek after i rebuilt the car, i had no probelms when i built the car initially, so im wondering what im missing.
with everything on the car loose, the chassis plate is fine, i semi tighten the bulkheads going corner to corner ie f1 r2 f2 r1.
then do the top deck in the same style then the chassis plate gets tweeked.
i losend off the bottm deck screws and then did the opposite, top deck first then bottom deck to get the same result.
the motor mount isnt on the car yet
any ideas
and yes, i have looked at the pit boss, but the shipping is too much to NZ 8(
ed
Last edited by Edwin Pibal; 06-12-2011 at 02:23 AM.
Reason: still cant spell