Originally Posted by
woozer71
Running the TC6 on the weekend I could not get out of the corners without doing a 360 Spin. I am running a ball diff at the moment. I had about 4 blokes go over the car and changed it a bit but it was still spinning coming out of the corners. Also the drivetrain is very tight after freeing everything up. Could I get some ideas on what could be my problems.
tweak and droop settings are very important. I built a 2nd tc6 and the 1st run was like what you are experiencing. Car was tweaked from the get go, which made it impossible to setup droop correctly.