Originally Posted by
valk
has anyone else had issues with the front drive belt hitting their servo saver post? i tried lowering the dif height and noticed it but raised the dif back up and it still hits when you steer heavy. i dont know if its hurting anything but the belt will twist when it rubs against it.
tried switching the belt to the other side of the car but now im too close to the servo arm and rub against that too on occasion so ill change it back.
would be nice if the belts on this car actually fit the pullies. might install a tensioner pully to keep the belt off my stuff.
Yes.... I had my front diff installed the wrong way around so the belt was running at a slight angle instead of in a straight line. I put the front diff in correctly so the belt ran straight and there was no more rubbing. Once the diff is installed correctly there will be no rubbing and no need for tensioners. The diff cams adjust the tension and even runnign in the lowest possible position I never had any rubbing.